Preparation and Performance Study of Bentonite Slurry–Modified Steel Slag Foam Concrete

Abstract In this work, foam concrete was prepared using steel slag (SS) and cement as the primary raw materials and bentonite slurry (BS) as an additive through a physical foaming method. Unconfined compressive strength (UCS) tests and thermal conductivity measurements were conducted on bentonite slurry–steel slag foam concrete (BS–SSFC) with different mix proportions. Moreover, the micromorphology of the samples was observed using scanning electron microscopy (SEM), and X-ray diffraction (XRD) was employed for the qualitative and semiquantitative phase analysis of hydration products and crystalline phase changes, thereby revealing the synergistic mechanism between steel slag and bentonite. Experimental results showed that adding BS and SS notably improves the FC’s UCS. Initially, the strength rises and then declines as the BS content, SS dosage, and solid-to-water ratio increases. The best mixing ratio was identified as a BS solid-to-water ratio 1 ∶ 15 , 10% SS content, and 5% BS mass fraction. Microstructural analysis indicates that a suitable amount of SS and BS enhances hydration product formation, leading to a denser matrix with fewer macropores due to the uniform bonding of solid-phase materials, thereby increasing strength. However, excessive SS and BS content lead to local aggregation of solid-phase materials, weakening the bonding with hydration products and causing an uneven pore distribution, a significant increase in macropores, and even the formation of cracks, ultimately reducing strength. The addition of BS and SS lowers the thermal conductivity of FC. SS increases porosity and introduces additional microvoids due to its inherent porosity, impeding heat transfer. Meanwhile, bentonite enhances the formation of micropores and nanoscale pores, reducing heat convection and increasing heat reflection and refraction, thereby hindering thermal transmission.

Authors

Institutions

Publication Details

Journal
Journal of Materials in Civil Engineering
Published
2026-11-16
DOI
https://doi.org/10.1061/jmcee7.mteng-24267
Primary Topic
Concrete and Cement Materials Research
Type
article
Field-Weighted Citation Impact
0.00
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

Preparation and Performance Study of Bentonite Slurry–Modified Steel Slag Foam Concrete

Yinkang Zhou, Shengwen Mai, Feiyang Shao, XIANG Guosheng et al.
3 links
Journal of Materials in Civil Engineering
Concrete and Cement Materials Research
article

Preparation and Performance Study of Bentonite Slurry–Modified Steel Slag Foam Concrete

Yinkang Zhou, Shengwen Mai, Feiyang Shao, XIANG Guosheng, Danqing Song
article en

Abstract

Abstract In this work, foam concrete was prepared using steel slag (SS) and cement as the primary raw materials and bentonite slurry (BS) as an additive through a physical foaming method. Unconfined compressive strength (UCS) tests and thermal conductivity measurements were conducted on bentonite slurry–steel slag foam concrete (BS–SSFC) with different mix proportions. Moreover, the micromorphology of the samples was observed using scanning electron microscopy (SEM), and X-ray diffraction (XRD) was employed for the qualitative and semiquantitative phase analysis of hydration products and crystalline phase changes, thereby revealing the synergistic mechanism between steel slag and bentonite. Experimental results showed that adding BS and SS notably improves the FC’s UCS. Initially, the strength rises and then declines as the BS content, SS dosage, and solid-to-water ratio increases. The best mixing ratio was identified as a BS solid-to-water ratio 1 ∶ 15 , 10% SS content, and 5% BS mass fraction. Microstructural analysis indicates that a suitable amount of SS and BS enhances hydration product formation, leading to a denser matrix with fewer macropores due to the uniform bonding of solid-phase materials, thereby increasing strength. However, excessive SS and BS content lead to local aggregation of solid-phase materials, weakening the bonding with hydration products and causing an uneven pore distribution, a significant increase in macropores, and even the formation of cracks, ultimately reducing strength. The addition of BS and SS lowers the thermal conductivity of FC. SS increases porosity and introduces additional microvoids due to its inherent porosity, impeding heat transfer. Meanwhile, bentonite enhances the formation of micropores and nanoscale pores, reducing heat convection and increasing heat reflection and refraction, thereby hindering thermal transmission.

Journal of Materials in Civil EngineeringVol. 39(3)
South China University of Technology (CN), Anhui University of Technology (CN)
Responsible consumption and production, Industry, innovation and infrastructure
Concrete and Cement Materials Research
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon