Material Removal and Dimensional Accuracy in Electrical Discharge Turning of AISI 4140 Steel Under Lateral Flushing and Full Immersion

Electrical discharge machining (EDM) offers certain advantages as a thermal process but also has drawbacks. A hybrid system called electrical discharge turning (EDT), which combines traditional turning with EDM, has been developed to overcome these. In this study, experiments were conducted using a copper electrode and cylindrical AISI 4140 tempered steel with a diameter of 12 mm. The experimental design was planned as a full factorial analysis, and the effects of parameters such as dielectric medium, machining depth, discharge current, and workpiece rotational speed on surface roughness (Ra), material removal rate (MRR), tool wear rate (TWR) and dimensional accuracy were investigated. Pulse-on time, pulse-off time and lateral flushing pressure were kept constant. In the experiments, an increase in discharge current increased surface roughness, MRR, and TWR, while an increase in workpiece rotational speed showed similar effects. The effect of discharge current on performance outputs was found to be more pronounced compared to rotational speed. The dielectric medium had no statistically significant main effect on any response. Because the achieved machining depths fell 26–83% short of the intended values, first- and second-order regression models and an XGBoost model based only on controllable process parameters were developed to estimate the depth to be set on the machine. In leave-one-out cross-validation, the second-order regression model (R2 = 0.85, RMSE = 0.56 mm) and the XGBoost model (nested; R2 = 0.82, RMSE = 0.61 mm) clearly outperformed the first-order linear model (R2 = 0.67, RMSE = 0.83 mm); these models require verification with independent experiments before practical use.

Authors

Institutions

Publication Details

Journal
Machines
Published
2026-11-16
DOI
https://doi.org/10.3390/machines14111360
Primary Topic
Advanced Machining and Optimization Techniques
Type
article
Field-Weighted Citation Impact
0.00
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

Material Removal and Dimensional Accuracy in Electrical Discharge Turning of AISI 4140 Steel Under Lateral Flushing and Full Immersion

Mehmet Subaşı, Ahmet Mavi, Hacı Bekir Özerkan, Emre Ayhan et al.
Machines
Advanced Machining and Optimization Techniques
article

Material Removal and Dimensional Accuracy in Electrical Discharge Turning of AISI 4140 Steel Under Lateral Flushing and Full Immersion

Mehmet Subaşı, Ahmet Mavi, Hacı Bekir Özerkan, Emre Ayhan, Ali Berk Aydoğdu, Görkem Can Palabıyık
article en

Abstract

Electrical discharge machining (EDM) offers certain advantages as a thermal process but also has drawbacks. A hybrid system called electrical discharge turning (EDT), which combines traditional turning with EDM, has been developed to overcome these. In this study, experiments were conducted using a copper electrode and cylindrical AISI 4140 tempered steel with a diameter of 12 mm. The experimental design was planned as a full factorial analysis, and the effects of parameters such as dielectric medium, machining depth, discharge current, and workpiece rotational speed on surface roughness (Ra), material removal rate (MRR), tool wear rate (TWR) and dimensional accuracy were investigated. Pulse-on time, pulse-off time and lateral flushing pressure were kept constant. In the experiments, an increase in discharge current increased surface roughness, MRR, and TWR, while an increase in workpiece rotational speed showed similar effects. The effect of discharge current on performance outputs was found to be more pronounced compared to rotational speed. The dielectric medium had no statistically significant main effect on any response. Because the achieved machining depths fell 26–83% short of the intended values, first- and second-order regression models and an XGBoost model based only on controllable process parameters were developed to estimate the depth to be set on the machine. In leave-one-out cross-validation, the second-order regression model (R2 = 0.85, RMSE = 0.56 mm) and the XGBoost model (nested; R2 = 0.82, RMSE = 0.61 mm) clearly outperformed the first-order linear model (R2 = 0.67, RMSE = 0.83 mm); these models require verification with independent experiments before practical use.

MachinesVol. 14(11)
Ostim Technical University (TR), Technische Universität Dresden (DE), Gazi University (TR)
Advanced Machining and Optimization Techniques
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon