Effect of Liquid Nitrogen Cooling on Machinability and Tool Wear Mechanisms in Cutting CGI-400
This study systematically investigates the performance of liquid nitrogen cooling in machining compacted graphite iron 400 (CGI-400), compared with conventional cutting fluid cooling, focusing on mechanical properties, cutting temperature, tool wear, and surface quality. Results indicate that liquid nitrogen cooling significantly reduces the cutting temperature by 22.38%, effectively suppresses flank wear and built-up edge formation, and demonstrates remarkable advantages at cutting lengths beyond 3000 m. Cryogenic embrittlement of CGI-400 under liquid nitrogen leads to an 11.32% reduction in tensile strength, while the temperature-dependent thermal conductivity influences heat management in the cutting zone. EDS analysis reveals less material adhesion and improved coating integrity under liquid nitrogen cooling, contributing to prolonged tool life and enhanced surface finish. This research provides theoretical and practical insights into the cryogenic machining of CGI-400.
Authors
- Fanning Meng (ORCID: https://orcid.org/0009-0007-4639-7372)
- Chunjing Shi (ORCID: https://orcid.org/0009-0002-4853-432X)
- Ying Yang (ORCID: https://orcid.org/0000-0002-1030-779X)
- Yingqi Shen (ORCID: https://orcid.org/0009-0006-4455-2669)
- Shanshan Xu (ORCID: https://orcid.org/0009-0002-6645-5035)
- Xu Sun (ORCID: https://orcid.org/0009-0007-3706-172X)
Institutions
- Hangzhou Dianzi University (CN)
Publication Details
- Journal
- MANUFACTURING TECHNOLOGY
- Published
- 2026-11-16
- DOI
- https://doi.org/10.21062/mft.2026.046
- Primary Topic
- Advanced machining processes and optimization
- Type
- article
- Field-Weighted Citation Impact
- 0.00
Funders
- China Association for Science and Technology
- National Natural Science Foundation of China
- Natural Science Foundation for Young Scientists of Shanxi Province
- Natural Science Foundation of Zhejiang Province
- Fundamental Research Funds for the Provincial Universities of Zhejiang