Three-dimensional CFD simulation of urban drainage confluence flows using a validated Reynolds Averaged Navier–Stokes (RANS) k-ε turbulence model
Urban drainage confluences exhibit complex flow dynamics that can induce hydrodynamic instabilities, sediment deposition and localised flooding. In this research, a validated 3D Reynolds averaged Navier–Stokes (RANS) k-ε turbulence model was developed and applied to investigate the influence of change in confluence angle and discharge ratio on flow conditions at an existing urban drainage confluence with a multi-cell box culvert. The results suggest that the standard k-ε framework can reproduce dominant large-scale velocity structures and mixing behaviour in the confluence under varied flow conditions. The findings indicate that lower confluence angles enhanced momentum exchange between tributary and main-channel flows while reducing flow separation, recirculation and backwater effects during peak flows. The results also revealed tributary hydraulic suppression in which the higher momentum of the main-channel flow restricted discharge through sections of the tributary multi-cell box culvert, causing localised stagnation and backwater effects. These findings can inform optimal redesign of urban drainage junctions experiencing failure conditions. Developed a 3D RANS k-ε turbulence model of an existing urban drainage junction with a multi-cell box culvertFlow velocity measurements undertaken in the field under varied flow conditions for model validationThe 3D RANS k-ε turbulence model captured dominant large-scale velocity structures and mixing patterns of the junction under wet-weather flow conditionsSimulated the effect of change of confluence angle and inflows on confluence flow dynamics.Confluence angles ≤30° promote efficient momentum exchange, limit separation and recirculation, and reduce backwater during peak flows. Developed a 3D RANS k-ε turbulence model of an existing urban drainage junction with a multi-cell box culvert Flow velocity measurements undertaken in the field under varied flow conditions for model validation The 3D RANS k-ε turbulence model captured dominant large-scale velocity structures and mixing patterns of the junction under wet-weather flow conditions Simulated the effect of change of confluence angle and inflows on confluence flow dynamics. Confluence angles ≤30° promote efficient momentum exchange, limit separation and recirculation, and reduce backwater during peak flows.
Authors
- Seith N. Mugume (ORCID: https://orcid.org/0000-0002-8289-0099)
- Andrew Nichols (ORCID: https://orcid.org/0000-0003-2821-621X)
- Keith J. Bwowe
Publication Details
- Journal
- Figshare
- Published
- 2026-11-16
- DOI
- https://doi.org/10.6084/m9.figshare.35024581
- Primary Topic
- Hydraulic flow and structures
- Type
- article
- Field-Weighted Citation Impact
- 0.00