Multifidelity Dust Erosion Analysis of Mars Entry Vehicles
This paper presents a multifidelity approach for estimating dust particle impact effects on the surface of planetary entry vehicles at hypersonic speeds. The multifidelity model used a cokriging approach combining a low-fidelity correlation with a correction factor from high-fidelity solutions. This multifidelity model allows efficient and accurate exploration of spacecraft design space to aid in thermal protection system (TPS) optimization in the presence of dust erosion and enables future computationally efficient uncertainty quantification to help minimize TPS sizing margins. Two sample problems demonstrate the approach: the ExoMars Schiaparelli lander and a hypersonic inflatable aerodynamic decelerator (HIAD) entry vehicle design space. Multifidelity models for the ExoMars and HIAD cases predicted independent high-fidelity test points with 1.83% mean and 5.05% maximum error for ExoMars and 3.84% mean and 11.35% maximum error for HIAD. Once created, the cost of evaluating the multifidelity models was approximately five orders of magnitude lower than one high-fidelity CFD solution. The converged ExoMars multifidelity model was evaluated along the ExoMars Schiaparelli entry trajectory and compared to literature. The HIAD model was applied to a set of entry trajectories to demonstrate the effectiveness of the model for candidate trajectory exploration.
Authors
- Serhat Hosder
- Dominic Zanti
- Andrew Hinkle
- Adam Boland
Institutions
- Langley Research Center (US)
- Missouri University of Science and Technology (US)
Publication Details
- Journal
- Journal of Spacecraft and Rockets
- Published
- 2026-11-16
- DOI
- https://doi.org/10.2514/1.a36752
- Primary Topic
- Gas Dynamics and Kinetic Theory
- Type
- article
- Field-Weighted Citation Impact
- 0.00