Investigation of Microstructure and Corrosion Resistance of Low-Carbon Steels Hot-Dip Coated with Secondary Aluminum Recovered from Aluminum Dross

Aluminium dross, which is generated as a by-product during aluminium production and processing, is a hazardous industrial waste whose recovery is of critical importance due to its adverse environmental impacts and high metallic content. In this study, the feasibility of utilizing secondary aluminium, recovered from industrial aluminium dross via the pyrometallurgical method, as a raw material in the hot-dip coating process and its effects on the corrosion behaviour of low-carbon steels were comprehensively investigated. During the experimental process, aluminium dross was melted in a graphite crucible in the presence of a 50% NaCl–50% KCl flux mixture at 10 wt.% relative to aluminium to recover metallic aluminium. Hot-dip coating processes were carried out at bath temperatures of 700 °C and 750 °C with immersion times of 15 and 30 s. The corrosion performance of the produced coatings was evaluated by potentiodynamic polarization and a 240 h static immersion corrosion test in a 3.5 wt.% NaCl solution, while their surface morphologies and elemental compositions were analysed using SEM-EDS. Corrosion kinetics calculations revealed that the corrosion current density (Icorr) of the specimens produced at a bath temperature of 750 °C decreased dramatically to 5.848 × 10⁻¹⁰ A·cm⁻², and the corrosion rate reached 0.000006 mm/year, exhibiting superior corrosion resistance compared to the uncoated steel. However, microstructural analyses demonstrated that the increased reaction time and temperature accelerated diffusion, resulting in the growth of sharp-edged brittle needle-like intermetallic phases, which was reflected in the electrochemical curves as instantaneous micro-galvanic fluctuations. The static immersion tests further revealed that the corrosion products formed a protective barrier through a parabolic mass gain; however, due to their porous nature, they promoted localized chloride ion retention. The results confirm that aluminium dross, a hazardous waste, can be successfully reintegrated into the circular economy as a protective coating material for the protection of steel surfaces.

Authors

Institutions

Publication Details

Journal
Journal of Engineering and Basic Sciences
Published
2026-11-16
DOI
https://doi.org/10.54709/joebs.2005154
Primary Topic
Corrosion Behavior and Inhibition
Type
article
Field-Weighted Citation Impact
0.00
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

Investigation of Microstructure and Corrosion Resistance of Low-Carbon Steels Hot-Dip Coated with Secondary Aluminum Recovered from Aluminum Dross

Selçuk Yeşiltepe, İbrahim Umut Yurtsever
Journal of Engineering and Basic Sciences
Corrosion Behavior and Inhibition
article

Investigation of Microstructure and Corrosion Resistance of Low-Carbon Steels Hot-Dip Coated with Secondary Aluminum Recovered from Aluminum Dross

Selçuk Yeşiltepe, İbrahim Umut Yurtsever
article en

Abstract

Aluminium dross, which is generated as a by-product during aluminium production and processing, is a hazardous industrial waste whose recovery is of critical importance due to its adverse environmental impacts and high metallic content. In this study, the feasibility of utilizing secondary aluminium, recovered from industrial aluminium dross via the pyrometallurgical method, as a raw material in the hot-dip coating process and its effects on the corrosion behaviour of low-carbon steels were comprehensively investigated. During the experimental process, aluminium dross was melted in a graphite crucible in the presence of a 50% NaCl–50% KCl flux mixture at 10 wt.% relative to aluminium to recover metallic aluminium. Hot-dip coating processes were carried out at bath temperatures of 700 °C and 750 °C with immersion times of 15 and 30 s. The corrosion performance of the produced coatings was evaluated by potentiodynamic polarization and a 240 h static immersion corrosion test in a 3.5 wt.% NaCl solution, while their surface morphologies and elemental compositions were analysed using SEM-EDS. Corrosion kinetics calculations revealed that the corrosion current density (Icorr) of the specimens produced at a bath temperature of 750 °C decreased dramatically to 5.848 × 10⁻¹⁰ A·cm⁻², and the corrosion rate reached 0.000006 mm/year, exhibiting superior corrosion resistance compared to the uncoated steel. However, microstructural analyses demonstrated that the increased reaction time and temperature accelerated diffusion, resulting in the growth of sharp-edged brittle needle-like intermetallic phases, which was reflected in the electrochemical curves as instantaneous micro-galvanic fluctuations. The static immersion tests further revealed that the corrosion products formed a protective barrier through a parabolic mass gain; however, due to their porous nature, they promoted localized chloride ion retention. The results confirm that aluminium dross, a hazardous waste, can be successfully reintegrated into the circular economy as a protective coating material for the protection of steel surfaces.

Journal of Engineering and Basic SciencesVol. 5
Osmaniye Korkut Ata University (TR)
Responsible consumption and production
Corrosion Behavior and Inhibition
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon