Toward Closing the Loop for PEEK in Material Extrusion: Filament Production from Virgin and Recycled Feedstock

Material extrusion (MEX) enables additive manufacturing of functional components from polyether ether ketone (PEEK). Given PEEK’s high cost, reintegrating production waste into the process chain is economically important. This study investigates PEEK filament production from virgin and recycled feedstock on a single-screw filament line. Following an analysis of process instabilities, the extruder screw, filament cooling system and die geometry were modified. Computational fluid dynamics (CFD) was used to evaluate 44 die variants; seven were manufactured and experimentally validated. At the measured mass flow rates, simulated pressure drops strongly correlated with measured melt pressures (r = 0.997). Simulations exceeded measured values by 3–10% for the 2.0 mm dies and by 48% for the 3.0 mm die. Forced-convection air cooling reduced the filament temperature at the guide rollers by 70–100 K and decreased ovality from 9.4% to 1.5%. Over 5 h of production, all diameter readings of the virgin-material filament remained within ±0.05 mm; after seven extrusion passes, 98% met this tolerance. Regrind from additively manufactured parts, likely owing to its flake-like particle geometry, yielded filament that missed the tolerance criterion. Tensile testing of low-crystallinity MEX specimens revealed no significant differences between virgin material and material extruded seven times.

Authors

Institutions

Publication Details

Journal
Polymers
Published
2026-11-16
DOI
https://doi.org/10.3390/polym18222871
Primary Topic
Additive Manufacturing and 3D Printing Technologies
Type
article
Field-Weighted Citation Impact
0.00

Funders

Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

Toward Closing the Loop for PEEK in Material Extrusion: Filament Production from Virgin and Recycled Feedstock

Thomas Vietor, Karl Hilbig, Maximilian Nowka, Peer Hach et al.
Polymers
Additive Manufacturing and 3D Printing Technologies
article

Toward Closing the Loop for PEEK in Material Extrusion: Filament Production from Virgin and Recycled Feedstock

Thomas Vietor, Karl Hilbig, Maximilian Nowka, Peer Hach, Sarah Hartmann
article en

Abstract

Material extrusion (MEX) enables additive manufacturing of functional components from polyether ether ketone (PEEK). Given PEEK’s high cost, reintegrating production waste into the process chain is economically important. This study investigates PEEK filament production from virgin and recycled feedstock on a single-screw filament line. Following an analysis of process instabilities, the extruder screw, filament cooling system and die geometry were modified. Computational fluid dynamics (CFD) was used to evaluate 44 die variants; seven were manufactured and experimentally validated. At the measured mass flow rates, simulated pressure drops strongly correlated with measured melt pressures (r = 0.997). Simulations exceeded measured values by 3–10% for the 2.0 mm dies and by 48% for the 3.0 mm die. Forced-convection air cooling reduced the filament temperature at the guide rollers by 70–100 K and decreased ovality from 9.4% to 1.5%. Over 5 h of production, all diameter readings of the virgin-material filament remained within ±0.05 mm; after seven extrusion passes, 98% met this tolerance. Regrind from additively manufactured parts, likely owing to its flake-like particle geometry, yielded filament that missed the tolerance criterion. Tensile testing of low-crystallinity MEX specimens revealed no significant differences between virgin material and material extruded seven times.

PolymersVol. 18(22)
Technische Universität Braunschweig (DE)
Technische Universität Braunschweig, Bundesministerium für Wirtschaft und Energie
Responsible consumption and production
Additive Manufacturing and 3D Printing Technologies
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon