Methane Humidity at the Huygens Landing Site: Saturation, Frost Point and the Precipitable Column
The Huygens probe measured a surface temperature of 93.7 kelvin, a pressure of 146.7 kilopascals and a methane mole fraction near 4.9 percent, yet those three numbers are rarely combined into the humidity budget they imply. This paper does that arithmetic. A Clausius-Clapeyron vapour-pressure curve anchored on the methane triple point gives a saturation pressure of about 16.6 kilopascals at the surface temperature, so the measured methane partial pressure of 7.2 kilopascals corresponds to a relative humidity of 43 percent, close to the value the probe's own instruments suggested. The same curve places the frost point of the surface air near 86.8 kelvin, only a few degrees below ambient, and a parcel lifted along the published dry adiabat reaches saturation after roughly five kilometres of ascent. Integrating a two-layer mixing-ratio profile over the full atmospheric column gives a precipitable methane inventory whose global liquid equivalent is 6.0 metres. Every figure follows from published Huygens values and standard thermodynamics, computed in the deposited script.
Authors
- William Alexander Aldred (ORCID: https://orcid.org/0009-0000-1215-577X)
Publication Details
- Journal
- Zenodo (CERN European Organization for Nuclear Research)
- Published
- 2026-11-17
- DOI
- https://doi.org/10.5281/zenodo.24295479
- Primary Topic
- Astro and Planetary Science
- Type
- article
- Field-Weighted Citation Impact
- 0.00