Whole-Life-Cycle Decarbonization Potential and Mechanical Performance of All-Steel Excavation Support Systems under Carbon Constraints

Abstract Traditional cast-in-place concrete retaining systems for deep foundation pits generate substantial embodied carbon over their life cycle. Existing comparative studies often decouple mechanical safety verification from carbon emission accounting, lacking multi-dimensional uncertainty evaluation under equivalent deformation constraints. Using a deep foundation pit project in China, this study employs finite element analysis to compare the deformation and mechanical performance of two retaining schemes under identical geometry, soil-water parameters, and excavation conditions. Based on the emission factor method, life-cycle carbon emissions are quantified across four stages: material production, material transportation, on-site construction, and demolition-and-disposal. A total of 5,000 Monte Carlo simulations are performed under normal and uniform distributions, incorporating key parameters such as carbon emission factors, transport distances, steel component reuse cycles, and material loss rates. Results show that both schemes provide comparable deformation control and meet the Grade-I deformation criteria. At baseline, the all-steel retaining system emits 1094.526 tCO2e, only 37.11% of the concrete system's 2949.692 tCO2e, achieving a 62.89% carbon reduction. Sensitivity analysis indicates a break-even reuse number of approximately 3.7 for steel components; the all-steel system becomes more carbon-efficient when reuse reaches 4 or more. It retains its low-carbon advantage even under conservative high material loss scenarios or varied transportation distances and modes. Further Monte Carlo results show that the median life-cycle emission of the concrete system is about 2.2 times that of the all-steel system under the normal-distribution assumption and 2.7 times under the uniform-distribution assumption, and the interquartile ranges barely overlap for both distribution cases, demonstrating statistical robustness. This study confirms that the recyclable all-steel retaining system offers stable emission reduction benefits, providing theoretical and data support for low-carbon scheme selection and quantitative carbon assessment in deep excavations.

Authors

Institutions

Publication Details

Journal
Engineering Research Express
Published
2026-11-16
DOI
https://doi.org/10.1088/2631-8695/aec2a5
Primary Topic
Environmental Impact and Sustainability
Type
article
Field-Weighted Citation Impact
0.00
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

Whole-Life-Cycle Decarbonization Potential and Mechanical Performance of All-Steel Excavation Support Systems under Carbon Constraints

Guo Huawei, Minghui Huang, Xinqi Chen, Jun Liu et al.
1 links
Engineering Research Express
Environmental Impact and Sustainability
article

Whole-Life-Cycle Decarbonization Potential and Mechanical Performance of All-Steel Excavation Support Systems under Carbon Constraints

Guo Huawei, Minghui Huang, Xinqi Chen, Jun Liu, Fei Sun
article en

Abstract

Abstract Traditional cast-in-place concrete retaining systems for deep foundation pits generate substantial embodied carbon over their life cycle. Existing comparative studies often decouple mechanical safety verification from carbon emission accounting, lacking multi-dimensional uncertainty evaluation under equivalent deformation constraints. Using a deep foundation pit project in China, this study employs finite element analysis to compare the deformation and mechanical performance of two retaining schemes under identical geometry, soil-water parameters, and excavation conditions. Based on the emission factor method, life-cycle carbon emissions are quantified across four stages: material production, material transportation, on-site construction, and demolition-and-disposal. A total of 5,000 Monte Carlo simulations are performed under normal and uniform distributions, incorporating key parameters such as carbon emission factors, transport distances, steel component reuse cycles, and material loss rates. Results show that both schemes provide comparable deformation control and meet the Grade-I deformation criteria. At baseline, the all-steel retaining system emits 1094.526 tCO2e, only 37.11% of the concrete system's 2949.692 tCO2e, achieving a 62.89% carbon reduction. Sensitivity analysis indicates a break-even reuse number of approximately 3.7 for steel components; the all-steel system becomes more carbon-efficient when reuse reaches 4 or more. It retains its low-carbon advantage even under conservative high material loss scenarios or varied transportation distances and modes. Further Monte Carlo results show that the median life-cycle emission of the concrete system is about 2.2 times that of the all-steel system under the normal-distribution assumption and 2.7 times under the uniform-distribution assumption, and the interquartile ranges barely overlap for both distribution cases, demonstrating statistical robustness. This study confirms that the recyclable all-steel retaining system offers stable emission reduction benefits, providing theoretical and data support for low-carbon scheme selection and quantitative carbon assessment in deep excavations.

Engineering Research Express
Henan Polytechnic University (CN), Zhoukou Vocational and Technical College (CN)
Responsible consumption and production, Climate action, Industry, innovation and infrastructure, Sustainable cities and communities
Environmental Impact and Sustainability
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon