Additive Manufacturing of a Monomaterial TPU Exoskeleton for Rheumatoid Arthritis: Fabrication Strategy and Preliminary Evaluation

[Rheumatoid arthritis (RA) progressively impairs hand mobility and limits daily activities, and commercial orthoses are often rigid, poorly fitted, or costly. Previous work proposed a customized monomaterial thermoplastic polyurethane (TPU) exoesqueleton with a functional stiffness gradient and validated its geometry computationally. However, its physical fabrication had not been reported. This study describes the additive manufacturing of that orthosis and documents the fabrication process and its outcomes. The device was printed in TPU [90A] using fused deposition modeling. Printing parameters, including nozzle temperature, speed, layer height, and region-specific infill, were defined to produce stiffer support zones and more flexible movement zones within a single material. The printed prototype was characterized by its mass, print time, material use, and dimensional deviation relative to the CAD (Solidworks) model, and it was inspected for fit, flexibility, and ease of donning and doffing. The prototype was obtained in 4 hours with a mass of 30 g, and the main printing difficulties were [stringing, jams, adhesion] and were addressed by [adjustments]. Preliminary observations indicated [fit and flexibility findings]. The prototype has not been tested with RA patients, so functional and clinical effectiveness remain unverified. These results show that a monomaterial TPU orthosis can be fabricated with accessible FDM technology and provide printing guidelines for future usability and clinical evaluation.]

Authors

Institutions

Publication Details

Journal
International Journal of Research and Innovation in Social Science
Published
2026-11-16
DOI
https://doi.org/10.47772/ijriss.2026.102500023
Primary Topic
Additive Manufacturing and 3D Printing Technologies
Type
article
Field-Weighted Citation Impact
0.00
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

Additive Manufacturing of a Monomaterial TPU Exoskeleton for Rheumatoid Arthritis: Fabrication Strategy and Preliminary Evaluation

Enrique de Jesús Mohedano Torres, Héctor Luis Gutiérrez Martínez, Emilio Merlo Peña, Diana Isabel Rodríguez Trejo et al.
1 links
International Journal of Research and Innovation in Social Science
Additive Manufacturing and 3D Printing Technologies
article

Additive Manufacturing of a Monomaterial TPU Exoskeleton for Rheumatoid Arthritis: Fabrication Strategy and Preliminary Evaluation

Enrique de Jesús Mohedano Torres, Héctor Luis Gutiérrez Martínez, Emilio Merlo Peña, Diana Isabel Rodríguez Trejo, María Fernanda Carmona Martínez, Camila Durán Latorre
article en

Abstract

[Rheumatoid arthritis (RA) progressively impairs hand mobility and limits daily activities, and commercial orthoses are often rigid, poorly fitted, or costly. Previous work proposed a customized monomaterial thermoplastic polyurethane (TPU) exoesqueleton with a functional stiffness gradient and validated its geometry computationally. However, its physical fabrication had not been reported. This study describes the additive manufacturing of that orthosis and documents the fabrication process and its outcomes. The device was printed in TPU [90A] using fused deposition modeling. Printing parameters, including nozzle temperature, speed, layer height, and region-specific infill, were defined to produce stiffer support zones and more flexible movement zones within a single material. The printed prototype was characterized by its mass, print time, material use, and dimensional deviation relative to the CAD (Solidworks) model, and it was inspected for fit, flexibility, and ease of donning and doffing. The prototype was obtained in 4 hours with a mass of 30 g, and the main printing difficulties were [stringing, jams, adhesion] and were addressed by [adjustments]. Preliminary observations indicated [fit and flexibility findings]. The prototype has not been tested with RA patients, so functional and clinical effectiveness remain unverified. These results show that a monomaterial TPU orthosis can be fabricated with accessible FDM technology and provide printing guidelines for future usability and clinical evaluation.]

International Journal of Research and Innovation in Social ScienceVol. 10(25)
Instituto Tecnológico de Toluca (MX), Tecnológico Nacional de México, Campus Pachuca (MX)
Good health and well-being
Additive Manufacturing and 3D Printing Technologies
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon