Carbon Aerogel Composite derived from PAN Fiber/Chitosan-Regulated Resorcinol-Formaldehyde Nanocomposite for High-Temperature Thermal Insulation
Abstract Low-density resorcinol−formaldehyde (RF)-based carbon aerogels are limited by weak interparticle connections, brittleness, and carbonization shrinkage. Here, a multiscale reinforcement strategy combined pre-oxidized polyacrylonitrile fiber felt (PANF) with chitosan (CTS)-mediated regulation of the RF matrix. CTS refined the aerogel particles, strengthened interparticle connections, and improved fiber/matrix bonding. Co-pyrolysis converted PANF into a continuous carbon−fiber network within the carbon aerogel matrix, while fiber reinforcement constrained in-plane carbonization shrinkage. At the optimized CTS content, composites measuring 200 × 200 × 16 mm exhibited a density of approximately 0.17 g/cm3, a compressive stress of 1.13 MPa at 10% strain, a flexural strength of 4.31 MPa, and a thermal conductivity of 0.065 W/(m·K) at 1100 °C in air. After 20 min of one-sided heating at a set temperature of 1500 °C, the 16 mm-thick composite reached a cold-side temperature of 460.9 °C. The composite retained its overall shape after the high-temperature test. These results link nanoscale network regulation and continuous fiber reinforcement to a favorable balance between mechanical load bearing and high-temperature thermal insulation at low density.
Authors
- Yonggang Jiang (ORCID: https://orcid.org/0000-0003-4632-5575)
- Yijie Hu (ORCID: https://orcid.org/0009-0001-3000-9108)
- Junzong Feng (ORCID: https://orcid.org/0000-0001-6844-8950)
- Yiren Long
- Jian Feng
Institutions
- National University of Defense Technology (CN)
Publication Details
- Journal
- ACS Applied Nano Materials
- Published
- 2026-11-16
- DOI
- https://doi.org/10.1021/acsanm.6c04300
- Primary Topic
- Aerogels and thermal insulation
- Type
- article
- Field-Weighted Citation Impact
- 0.00
Funders
- National Natural Science Foundation of China
- Natural Science Foundation of Hunan Province