Numerical Investigation of Forming Limits in Zn–Ag–Cu-Based Alloy Sheets Using Estimated Anisotropic Constitutive Properties

In the fabrication of biomedical sheet components from next-generation Zn-Ag-Cu-based alloys, establishing the relationship between the material's directional plastic behavior and the limits of multiaxial forming is of critical importance. This study presents an integrated analytical-numerical approach developed to convert the mechanical properties of solid alloys into direction-dependent sheet properties and forming limit diagrams. A distinctive feature of this methodology is the theoretical estimation of plastic anisotropy coefficients based on a proposed analytical approximation that incorporates alloy composition and crystal lattice geometry. These estimated coefficients were incorporated into a finite element model via directional yield stresses. For three independent datasets, elastic properties were determined using the Voigt-Reuss-Hill approach, hardening behavior was modeled with the Hollomon equation, and the anisotropic yield surface was approximated using the Hill48 criterion. The resulting synthetic sheet material cards were utilized in virtual Nakajima tests involving seven specimen geometries, where the onset of local necking was determined from time-dependent changes in strain histories at critical points. While the minimum predicted major limit strains ranged from 0.038 to 0.111 across the datasets in paths near plane strain, the major limit strain in the uniaxial loading region reached 0.371. In contrast, the limits in the biaxial tensile region converged within the range of 0.328–0.345. This analysis demonstrates that formability differences among material models become particularly evident in deformation paths close to uniaxial and in-plane strain. These findings represent preliminary computational predictions, and further experimental microstructural testing is required to verify actual sheet formability.

Authors

Institutions

Publication Details

Journal
Brilliant Engineering
Published
2026-11-16
DOI
https://doi.org/10.36937/ben.2027.41215
Primary Topic
Metal Forming Simulation Techniques
Type
article
Field-Weighted Citation Impact
0.00
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

Numerical Investigation of Forming Limits in Zn–Ag–Cu-Based Alloy Sheets Using Estimated Anisotropic Constitutive Properties

Atilla Uğurlu
Brilliant Engineering
Metal Forming Simulation Techniques
article

Numerical Investigation of Forming Limits in Zn–Ag–Cu-Based Alloy Sheets Using Estimated Anisotropic Constitutive Properties

Atilla Uğurlu
article en

Abstract

In the fabrication of biomedical sheet components from next-generation Zn-Ag-Cu-based alloys, establishing the relationship between the material's directional plastic behavior and the limits of multiaxial forming is of critical importance. This study presents an integrated analytical-numerical approach developed to convert the mechanical properties of solid alloys into direction-dependent sheet properties and forming limit diagrams. A distinctive feature of this methodology is the theoretical estimation of plastic anisotropy coefficients based on a proposed analytical approximation that incorporates alloy composition and crystal lattice geometry. These estimated coefficients were incorporated into a finite element model via directional yield stresses. For three independent datasets, elastic properties were determined using the Voigt-Reuss-Hill approach, hardening behavior was modeled with the Hollomon equation, and the anisotropic yield surface was approximated using the Hill48 criterion. The resulting synthetic sheet material cards were utilized in virtual Nakajima tests involving seven specimen geometries, where the onset of local necking was determined from time-dependent changes in strain histories at critical points. While the minimum predicted major limit strains ranged from 0.038 to 0.111 across the datasets in paths near plane strain, the major limit strain in the uniaxial loading region reached 0.371. In contrast, the limits in the biaxial tensile region converged within the range of 0.328–0.345. This analysis demonstrates that formability differences among material models become particularly evident in deformation paths close to uniaxial and in-plane strain. These findings represent preliminary computational predictions, and further experimental microstructural testing is required to verify actual sheet formability.

Brilliant EngineeringVol. 8(1)
Atatürk University (TR)
Metal Forming Simulation Techniques
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon