Stability Assessment during Active Back-Support Exoskeleton Use for Construction Tasks

Abstract Active back-support exoskeletons are increasingly examined for reducing musculoskeletal load in construction; however, their influence on postural stability during dynamic framing tasks remains insufficiently understood. This study evaluated stability-related loading patterns under exoskeleton-assisted task execution by analyzing left–right plantar pressure distributions across the toe, metatarsal, arch, and heel regions during six carpentry subtasks performed with an active back-support exoskeleton. Foot plantar pressure data were processed to extract peak pressure, average pressure, pressure-time integral, maximum pressure gradient, and full width at half maximum, and paired t -tests were used to assess bilateral differences across foot regions. Significant left–right differences emerged across multiple subtasks for peak pressure, pressure-time integral, and maximum pressure gradient, indicating asymmetric load transfer during bending, lifting, twisting, and installation postures. Stability-related asymmetry was most pronounced in the arch and metatarsal regions, where consistent bilateral differences and concentrated pressure-gradient shifts revealed midfoot-driven compensatory strategies. Although the toe and heel regions exhibited the highest absolute loads, these areas did not reliably indicate stability-related asymmetry, reinforcing the diagnostic importance of midfoot asymmetries during exoskeleton-assisted tasks. The limited differences observed in the full width at half maximum metric further indicate that stability-related asymmetry was driven less by overall contact duration and more by localized midfoot loading dynamics. These results show that exoskeleton-assisted carpentry subtasks are associated with asymmetric plantar loading patterns, particularly in the arch and metatarsal regions, revealing potential stability risks in construction applications. By establishing task-level, region-specific stability profiles, this study provides evidence to support the development of construction-specific stability benchmarks and to guide the design of adaptive, sensor-driven exoskeletons that monitor and redistribute load for safer integration into construction workflows.

Authors

Institutions

Publication Details

Journal
Journal of Computing in Civil Engineering
Published
2026-11-16
DOI
https://doi.org/10.1061/jccee5.cpeng-7927
Primary Topic
Prosthetics and Rehabilitation Robotics
Type
article
Field-Weighted Citation Impact
0.00
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

Stability Assessment during Active Back-Support Exoskeleton Use for Construction Tasks

Houtan Jebelli, Abiola Abosede Akanmu, Amit Ojha, Akinwale Okunola
2 links
Journal of Computing in Civil Engineering
Prosthetics and Rehabilitation Robotics
article

Stability Assessment during Active Back-Support Exoskeleton Use for Construction Tasks

Houtan Jebelli, Abiola Abosede Akanmu, Amit Ojha, Akinwale Okunola
article en

Abstract

Abstract Active back-support exoskeletons are increasingly examined for reducing musculoskeletal load in construction; however, their influence on postural stability during dynamic framing tasks remains insufficiently understood. This study evaluated stability-related loading patterns under exoskeleton-assisted task execution by analyzing left–right plantar pressure distributions across the toe, metatarsal, arch, and heel regions during six carpentry subtasks performed with an active back-support exoskeleton. Foot plantar pressure data were processed to extract peak pressure, average pressure, pressure-time integral, maximum pressure gradient, and full width at half maximum, and paired t -tests were used to assess bilateral differences across foot regions. Significant left–right differences emerged across multiple subtasks for peak pressure, pressure-time integral, and maximum pressure gradient, indicating asymmetric load transfer during bending, lifting, twisting, and installation postures. Stability-related asymmetry was most pronounced in the arch and metatarsal regions, where consistent bilateral differences and concentrated pressure-gradient shifts revealed midfoot-driven compensatory strategies. Although the toe and heel regions exhibited the highest absolute loads, these areas did not reliably indicate stability-related asymmetry, reinforcing the diagnostic importance of midfoot asymmetries during exoskeleton-assisted tasks. The limited differences observed in the full width at half maximum metric further indicate that stability-related asymmetry was driven less by overall contact duration and more by localized midfoot loading dynamics. These results show that exoskeleton-assisted carpentry subtasks are associated with asymmetric plantar loading patterns, particularly in the arch and metatarsal regions, revealing potential stability risks in construction applications. By establishing task-level, region-specific stability profiles, this study provides evidence to support the development of construction-specific stability benchmarks and to guide the design of adaptive, sensor-driven exoskeletons that monitor and redistribute load for safer integration into construction workflows.

Journal of Computing in Civil EngineeringVol. 41(2)
University of Kansas (US), University of Illinois Urbana-Champaign (US), Virginia Tech (US)
Good health and well-being
Prosthetics and Rehabilitation Robotics
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon