From Passive Reinforcement to Active Network Formation: Photoactive Nanocellulose Enables Initiator- and Cross-Linker-Free Multifunctional Hydrogels

Abstract Hydrogels require molecular initiators and cross-linkers, whereas nanocellulose serves as passive reinforcement. Here, photoactive cellulose nanofibrils (CNFp) enabled hydrogel formation without separately added molecular photoinitiator or covalent cross-linker. Phenyl alkene groups rendered CNFp photoresponsive, allowing it to act as a photoactive component and nanoscale reinforcement while promoting network formation. Under 365 nm irradiation, CNFp-PAM/Al3+ hydrogels formed within approximately 10 min. The optimized CNFp1.0-PAM/Al3+6.4 hydrogel exhibited 264.85 kPa tensile strength and 765.22% elongation at break. It withstood 500 cycles at 100% strain, showed approximately 200% swelling after 50 h, and adhered to stainless steel at 115.13 ± 15.61 kPa. As a strain sensor, it showed an approximately 170 ms rise time, gauge factor (GF) values of 1.46−3.50 over 0−500% strain, and stable signals over 600 cycles. It detected joint motion, 50−200 g loads, and writing trajectories. This work establishes nanocellulose as an active network-forming platform for mechanically robust, sensing-capable hydrogels.

Authors

Institutions

Publication Details

Journal
Biomacromolecules
Published
2026-11-16
DOI
https://doi.org/10.1021/acs.biomac.6c01976
Primary Topic
Advanced Cellulose Research Studies
Type
article
Field-Weighted Citation Impact
0.00

Funders

Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

From Passive Reinforcement to Active Network Formation: Photoactive Nanocellulose Enables Initiator- and Cross-Linker-Free Multifunctional Hydrogels

许在叶, Yimin Fan, Huangjingyi Chen, Juan Yu et al.
5 links
Biomacromolecules
Advanced Cellulose Research Studies
article

From Passive Reinforcement to Active Network Formation: Photoactive Nanocellulose Enables Initiator- and Cross-Linker-Free Multifunctional Hydrogels

许在叶, Yimin Fan, Huangjingyi Chen, Juan Yu, Bowen Li, Hanlu Ji, Liya Yi, Liqin Jiang
article en

Abstract

Abstract Hydrogels require molecular initiators and cross-linkers, whereas nanocellulose serves as passive reinforcement. Here, photoactive cellulose nanofibrils (CNFp) enabled hydrogel formation without separately added molecular photoinitiator or covalent cross-linker. Phenyl alkene groups rendered CNFp photoresponsive, allowing it to act as a photoactive component and nanoscale reinforcement while promoting network formation. Under 365 nm irradiation, CNFp-PAM/Al3+ hydrogels formed within approximately 10 min. The optimized CNFp1.0-PAM/Al3+6.4 hydrogel exhibited 264.85 kPa tensile strength and 765.22% elongation at break. It withstood 500 cycles at 100% strain, showed approximately 200% swelling after 50 h, and adhered to stainless steel at 115.13 ± 15.61 kPa. As a strain sensor, it showed an approximately 170 ms rise time, gauge factor (GF) values of 1.46−3.50 over 0−500% strain, and stable signals over 600 cycles. It detected joint motion, 50−200 g loads, and writing trajectories. This work establishes nanocellulose as an active network-forming platform for mechanically robust, sensing-capable hydrogels.

Biomacromolecules
Nanjing Forestry University (CN)
National Natural Science Foundation of China
Advanced Cellulose Research Studies
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon