Prevent dendrite formation in metal-anode batteries
This revised article addresses Q0018, 'Prevent dendrite formation in metal-anode batteries?' using a question-specific mathematical construction rather than a generic logarithmic template. The proposed model, termed the Dendrite Initiation-Propagation Hazard Model, uses current density J, pore radius r_p, grain-boundary fracture strength sigma_gb, crack length a, fracture toughness K_IC and stack pressure P and is ordered along cycle number and plating condition. The construction is anchored to external primary research classified as STRONG DIRECT SUPPORT in the validation atlas. The external evidence establishes experimentally measurable mechanisms or target performance; it is not conflated with proof of the new equation itself. The model defines explicit state variables, derives a dimensionless objective or hazard, specifies a prospective calibration procedure, and states falsifiable predictions. The experimental constraint carried forward from the atlas is: Operando tomography directly identifies dendrite initiation/propagation controls and mitigation levers. The article incorporates the required correction: Use fracture/current-density thresholds; λ changes at crack initiation.
Authors
- begüm yıldırım
Publication Details
- Journal
- Zenodo (CERN European Organization for Nuclear Research)
- Published
- 2026-11-16
- DOI
- https://doi.org/10.5281/zenodo.24282896
- Primary Topic
- Advanced Battery Materials and Technologies
- Type
- preprint