Size-Dependent Elastic–Plastic Analysis of Functionally Graded Thick Cylinders Using a Unified Strain Gradient Elasticity-Plasticity Theory

A unified strain-gradient elasticity–plasticity framework is presented for the size-dependent elastic–plastic analysis of functionally graded (FG) thick-walled cylinders subjected to internal and external pressure. Strain-gradient elasticity is employed in the elastic region, whereas strain-gradient plasticity governs the plastic response, allowing both elastic and plastic size effects to be incorporated within a single semi-analytical formulation. Material properties, including Young’s modulus, yield stress, and hardening modulus, are assumed to vary radially according to power-law distributions. Analytical field expressions are derived for the elastic and plastic regions under axisymmetric plane-strain conditions. The elastic response is represented through a reduced-order tensorial stress-gradient correction motivated by the Ru–Aifantis framework, while the plastic response is formulated using the Aifantis strain-gradient plasticity model. The elastic–plastic interface is determined from stress continuity, the external boundary condition, and a gradient-enhanced yield criterion. Parametric studies are performed to investigate the effects of internal pressure, elastic length scale, plastic strain-gradient coefficient, structural size, and material gradation index. The results show that internal pressure enlarges the plastic zone, whereas increasing the plastic gradient coefficient suppresses plastic-zone growth due to gradient-induced hardening. Material gradation significantly influences stress redistribution and yielding behavior. In contrast, the elastic length scale has a relatively small effect on the interface location but becomes more important for micro-scale cylinders. The reduced-order elastic-gradient correction is independently verified against an analytical strain-gradient elasticity solution for a purely elastic cylinder, yielding relative L 2 differences of 2.80% and 2.78% for the radial and circumferential stresses, respectively. Comparisons with classical and SGP-only solutions quantify the distinct contributions of elastic and plastic gradient effects and identify the scale regime in which the elastic-gradient correction becomes measurable.

Authors

Institutions

Publication Details

Journal
International Journal of Applied Mechanics
Published
2026-11-16
DOI
https://doi.org/10.1142/s1758825126500997
Primary Topic
Nonlocal and gradient elasticity in micro/nano structures
Type
article
Field-Weighted Citation Impact
0.00
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

Size-Dependent Elastic–Plastic Analysis of Functionally Graded Thick Cylinders Using a Unified Strain Gradient Elasticity-Plasticity Theory

Hassan Shokrollahi, Saeid Varmazyari
International Journal of Applied Mechanics
Nonlocal and gradient elasticity in micro/nano structures
article

Size-Dependent Elastic–Plastic Analysis of Functionally Graded Thick Cylinders Using a Unified Strain Gradient Elasticity-Plasticity Theory

Hassan Shokrollahi, Saeid Varmazyari
article en

Abstract

A unified strain-gradient elasticity–plasticity framework is presented for the size-dependent elastic–plastic analysis of functionally graded (FG) thick-walled cylinders subjected to internal and external pressure. Strain-gradient elasticity is employed in the elastic region, whereas strain-gradient plasticity governs the plastic response, allowing both elastic and plastic size effects to be incorporated within a single semi-analytical formulation. Material properties, including Young’s modulus, yield stress, and hardening modulus, are assumed to vary radially according to power-law distributions. Analytical field expressions are derived for the elastic and plastic regions under axisymmetric plane-strain conditions. The elastic response is represented through a reduced-order tensorial stress-gradient correction motivated by the Ru–Aifantis framework, while the plastic response is formulated using the Aifantis strain-gradient plasticity model. The elastic–plastic interface is determined from stress continuity, the external boundary condition, and a gradient-enhanced yield criterion. Parametric studies are performed to investigate the effects of internal pressure, elastic length scale, plastic strain-gradient coefficient, structural size, and material gradation index. The results show that internal pressure enlarges the plastic zone, whereas increasing the plastic gradient coefficient suppresses plastic-zone growth due to gradient-induced hardening. Material gradation significantly influences stress redistribution and yielding behavior. In contrast, the elastic length scale has a relatively small effect on the interface location but becomes more important for micro-scale cylinders. The reduced-order elastic-gradient correction is independently verified against an analytical strain-gradient elasticity solution for a purely elastic cylinder, yielding relative L 2 differences of 2.80% and 2.78% for the radial and circumferential stresses, respectively. Comparisons with classical and SGP-only solutions quantify the distinct contributions of elastic and plastic gradient effects and identify the scale regime in which the elastic-gradient correction becomes measurable.

International Journal of Applied Mechanics
Kharazmi University (IR)
Nonlocal and gradient elasticity in micro/nano structures
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon