Interfacial Mo−N/Mo‒C Bond Engineering between Toxic-Free Exfoliated g-C3N4 and MoS2 2D/2d Z-Scheme Heterojunctions for Enhanced Sunlight-Driven Photocatalysis
Abstract An in situ H2O2-assisted solvothermal treatment was developed as a toxic-free strategy for the simultaneous exfoliation and heteroatom doping of g-C3N4, producing ultrathin CN-48 for constructing 2D/2D CN-48/MoS2 direct Z-scheme heterojunctions. X-ray diffraction (XRD) and high-resolution transmission electron microscopy (HRTEM) confirmed the lamellar heterostructure with reduced MoS2 interlayer stacking. X-ray photoelectron spectroscopy (XPS) revealed interfacial Mo−N/Mo−C bonds arising from partial substitution of graphitic/pyrrolic nitrogen and carbon sites in CN-48 by Mo species from MoS2. Following these modifications, the optimized MC-10 composite exhibited a photoluminescence lifetime of 5.68 μs, representing a ∼ 184% increase over that of CN-48 (2.00 μs), along with a charge carrier density of 6.22 × 10−20 cm−3, ∼ 122% higher than that of CN-48 (2.80 × 10−20 cm−3). Electrochemical impedance spectroscopy further demonstrated a ∼ 78% reduction in charge-transfer resistance (60.18 Ω for MC-10 and 270.71 Ω for CN-48). The reduction of the band gap from 2.73 eV (CN-48) to 2.59 eV (MC-10) broadens solar-light harvesting. Under natural sunlight, MC-10 achieved 71% and 86% degradation of rhodamine B (RhB) and tetracycline (TC), respectively, with degradation rate constants that were 210% and 245% higher than those of CN-48. Radical trapping experiments identified O2•‒ > h+ > OH• as the dominant reactive species. Moreover, MC-10 maintained a > 97% degradation efficiency over five consecutive cycles, with total organic carbon (TOC)/chemical oxygen demand (COD) reductions of 53% and 67% for RhB and TC, respectively, confirming its structural and chemical stability. Overall, the engineered 2D/2D CN-48/MoS2 interface promotes efficient charge separation and transfer, enabling a reusable and sustainable platform for solar-driven photocatalytic wastewater remediation.
Authors
- Kumaravelu Thanigai Arul (ORCID: https://orcid.org/0000-0002-3197-0582)
- Hendrik Christoffel Swart (ORCID: https://orcid.org/0000-0001-5233-0130)
- Shubra Singh (ORCID: https://orcid.org/0000-0001-7894-1896)
- Subbaraya Narayana Kalkura (ORCID: https://orcid.org/0000-0001-5777-2907)
- David Edmond Motaung (ORCID: https://orcid.org/0000-0001-9888-6089)
- Chung‐Li Dong (ORCID: https://orcid.org/0000-0002-4289-4677)
- Saranya Sekar
- Prince Makarios Paul S
- Moorthy Babu Sridharan
- Sandeep Eswaran Panchu
- Ezhilarasi S. B
Institutions
- Tamkang University (TW)
- University of the Free State (ZA)
- Anna University, Chennai (IN)
- Karpagam Academy of Higher Education (IN)
- Saveetha University (IN)
Publication Details
- Journal
- ACS Applied Engineering Materials
- Published
- 2026-11-16
- DOI
- https://doi.org/10.1021/acsaenm.6c00985
- Primary Topic
- Advanced Photocatalysis Techniques
- Type
- article
- Field-Weighted Citation Impact
- 0.00
Funders
- Department of Science and Innovation, South Africa
- National Research Foundation
- Department of Science and Technology, Ministry of Science and Technology, India
- University Grants Commission