Influence of CO 3 2- and SO 4 2- on the chloride binding capacity of AAMs with municipal solid waste incineration fly ash

Abstract Alkali-activated materials (AAMs) are widely used for the treatment of chloride-rich municipal solid waste incineration fly ash (MSWI FA). However, there is a lack of study on the influence of inevitable CO32- and SO42- from MSWI FA on the chloride binding capacity of AAMs. In this study, AAMs with different levels of internal Cl-, SO42- and CO32- were prepared to simulate the systems with MSWI FA to provide insights into the intricate competition of three anions for being bound by in-situ formed hydrotalcites (Ht) in AAMs. The results showed that at 5 wt% internal Cl-, CO32- reduced bound chloride by 0.81~3.4%, whereas SO42- increased it by 3.7~10.2%, and the influence of both anions decreased with prolonging curing time from 7d to 28d. Ht formation in AAMs with 3 wt% Cl- increased from 5.6 wt% to 6.3 wt% and to 7.1 wt% with the presence of CO32- and SO42-, respectively, while an increase in Cl- from 3 wt% to 5 wt% slightly varied the Ht content. Cold-water extraction for chloride binding capacity quantification varied the phase assemblage due to dissolution, and the optimal extraction time was 2h for powder samples. Spatial distribution of Ht was obtained by quantitative SEM-EDS hypermaps analysis, which revealed that Ca-Al Ht and Mg-Al Ht coexisted around GGBS, but Cl- and SO42- showed preference for intercalation into the Ca-Al Ht. The SO42- from dissolved GGBS competed with Cl- for intercalating into Ht, and the statistic distribution of S and Cl in the Ht formed in AAMs was probably independent of the relative concentration of two anions in the raw materials. The findings suggest that stabilizing the sulfate by other phases rather than Ht to reduce the competition with chloride is vital to achieve high chloride binding by Ht in AAMs with MSWI FA.

Authors

Institutions

Publication Details

Journal
Materials Reports Solidwaste and Ecomaterials
Published
2026-11-16
DOI
https://doi.org/10.26599/mrse.2026.9520042
Primary Topic
Recycling and utilization of industrial and municipal waste in materials production
Type
article
Field-Weighted Citation Impact
0.00
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

Influence of CO 3 2- and SO 4 2- on the chloride binding capacity of AAMs with municipal solid waste incineration fly ash

Teng Ma, Caihong Xue, Zhengxin Chen, Qingxin Zhao et al.
1 links
Materials Reports Solidwaste and Ecomaterials
Recycling and utilization of industrial and municipal waste in materials production
article

Influence of CO 3 2- and SO 4 2- on the chloride binding capacity of AAMs with municipal solid waste incineration fly ash

Teng Ma, Caihong Xue, Zhengxin Chen, Qingxin Zhao, Yu Chen, Dezhi Zhao
article en

Abstract

Abstract Alkali-activated materials (AAMs) are widely used for the treatment of chloride-rich municipal solid waste incineration fly ash (MSWI FA). However, there is a lack of study on the influence of inevitable CO32- and SO42- from MSWI FA on the chloride binding capacity of AAMs. In this study, AAMs with different levels of internal Cl-, SO42- and CO32- were prepared to simulate the systems with MSWI FA to provide insights into the intricate competition of three anions for being bound by in-situ formed hydrotalcites (Ht) in AAMs. The results showed that at 5 wt% internal Cl-, CO32- reduced bound chloride by 0.81~3.4%, whereas SO42- increased it by 3.7~10.2%, and the influence of both anions decreased with prolonging curing time from 7d to 28d. Ht formation in AAMs with 3 wt% Cl- increased from 5.6 wt% to 6.3 wt% and to 7.1 wt% with the presence of CO32- and SO42-, respectively, while an increase in Cl- from 3 wt% to 5 wt% slightly varied the Ht content. Cold-water extraction for chloride binding capacity quantification varied the phase assemblage due to dissolution, and the optimal extraction time was 2h for powder samples. Spatial distribution of Ht was obtained by quantitative SEM-EDS hypermaps analysis, which revealed that Ca-Al Ht and Mg-Al Ht coexisted around GGBS, but Cl- and SO42- showed preference for intercalation into the Ca-Al Ht. The SO42- from dissolved GGBS competed with Cl- for intercalating into Ht, and the statistic distribution of S and Cl in the Ht formed in AAMs was probably independent of the relative concentration of two anions in the raw materials. The findings suggest that stabilizing the sulfate by other phases rather than Ht to reduce the competition with chloride is vital to achieve high chloride binding by Ht in AAMs with MSWI FA.

Materials Reports Solidwaste and Ecomaterials
Yanshan University (CN), State Key Laboratory of Metastable Materials Science and Technology (CN)
Responsible consumption and production
Recycling and utilization of industrial and municipal waste in materials production
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon