Effect of core architecture on flexural strength and failure behavior of additively manufactured composite sandwich panels

The development of highly porous structures that combine low weight with high mechanical performance is one of the key challenges in modern materials science and mechanical engineering. This challenge is particularly relevant to the design of sandwich structures for aerospace, automotive, and other industrial applications, where high specific strength and stiffness are required. A promising approach to addressing this challenge is the use of mechanical metamaterials as cores of sandwich panels. In this study, a comparative investigation was conducted into the effect of core architecture on the mechanical behavior and failure mechanisms of additively manufactured composite sandwich panels made of polylactic acid (PLA) and polyamide 6 reinforced with 30 wt.% carbon fibers (PA6+CF30) under three-point bending. Cores designed based on two-dimensional and three-dimensional unit cells were considered. The apparent flexural modulus and maximum flexural stress of the structures were determined. The failure process was analyzed using a digital image correlation system. In addition, numerical simulations were performed to investigate the stress state and predict the regions of failure initiation. The maximum flexural stress of sandwich panels with a three-dimensional core design was, on average, 3.8 times higher than that of panels with a two-dimensional core design. Analysis of the maximum principal stress-fields demonstrated the potential of numerical simulations for predicting failure initiation zones, which coincided with the experimentally observed damage regions. The obtained results can be used in the design of lightweight, high-strength sandwich structures with prescribed deformation and failure scenarios.

Authors

Institutions

Publication Details

Journal
Frattura ed Integrità Strutturale
Published
2026-11-16
DOI
https://doi.org/10.3221/igf-esis.79.14
Primary Topic
Cellular and Composite Structures
Type
article
Field-Weighted Citation Impact
0.00
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

Effect of core architecture on flexural strength and failure behavior of additively manufactured composite sandwich panels

A. S. Tarasova, Yulia Pirogova, Ташкинов Михаил Анатольевич, Ilia V. Vindokurov et al.
5 links
Frattura ed Integrità Strutturale
Cellular and Composite Structures
article

Effect of core architecture on flexural strength and failure behavior of additively manufactured composite sandwich panels

A. S. Tarasova, Yulia Pirogova, Ташкинов Михаил Анатольевич, Ilia V. Vindokurov, Nataliya Elenskaya, Aleksei Kondrashov
article en

Abstract

The development of highly porous structures that combine low weight with high mechanical performance is one of the key challenges in modern materials science and mechanical engineering. This challenge is particularly relevant to the design of sandwich structures for aerospace, automotive, and other industrial applications, where high specific strength and stiffness are required. A promising approach to addressing this challenge is the use of mechanical metamaterials as cores of sandwich panels. In this study, a comparative investigation was conducted into the effect of core architecture on the mechanical behavior and failure mechanisms of additively manufactured composite sandwich panels made of polylactic acid (PLA) and polyamide 6 reinforced with 30 wt.% carbon fibers (PA6+CF30) under three-point bending. Cores designed based on two-dimensional and three-dimensional unit cells were considered. The apparent flexural modulus and maximum flexural stress of the structures were determined. The failure process was analyzed using a digital image correlation system. In addition, numerical simulations were performed to investigate the stress state and predict the regions of failure initiation. The maximum flexural stress of sandwich panels with a three-dimensional core design was, on average, 3.8 times higher than that of panels with a two-dimensional core design. Analysis of the maximum principal stress-fields demonstrated the potential of numerical simulations for predicting failure initiation zones, which coincided with the experimentally observed damage regions. The obtained results can be used in the design of lightweight, high-strength sandwich structures with prescribed deformation and failure scenarios.

Frattura ed Integrità StrutturaleVol. 21(79)
Perm National Research Polytechnic University (RU)
Industry, innovation and infrastructure
Cellular and Composite Structures
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon