Phase Chemistry and Spatial Organization Govern Chloride Corrosion Behavior of CrFeNi-Based Multi-Principal Element Alloys

Phase heterogeneity provides an effective strategy for designing multi-principal element alloys (MPEAs), yet how phase constitution and spatial organization regulate chloride corrosion remains insufficiently understood. Here, the electrochemical corrosion behavior of as-cast equiatomic CrFeNi (AC-CrFeNi), as-cast Cr30Fe30Ni30Al5Ti5 (AC-CrFeNiAlTi), and hot-rolled Cr30Fe30Ni30Al5Ti5 (HR-CrFeNiAlTi) was comparatively investigated in 3.5 wt.% NaCl solution. The Al/Ti-induced transition from a single-phase FCC structure to a face-centered cubic (FCC) and body-centered cubic (BCC) heterogeneous architecture containing hierarchical ordered precipitates reduced the corrosion current density from 15.15 to 9.302 μA cm−2 and increased the low-frequency impedance modulus from 9.457 to 16.702 kΩ cm2. Further reorganization of the FCC/BCC regions into a directional lamellar morphology at unchanged nominal composition enhanced the corrosion resistance, yielding an icorr of 6.47 μA cm−2 and |Z|0.01 Hz of 47.176 kΩ cm2. Electrochemical impedance analysis revealed that the improved corrosion response of the hot-rolled alloy was accompanied by a more capacitive interfacial response and prolonged relaxation behavior. Post-electrochemical characterization revealed localized oxygen-enriched corrosion products, while XRD confirmed the retention of the primary FCC structure in AC-CrFeNi and the FCC/BCC structures in both CrFeNiAlTi conditions, indicating that corrosion remained controlled by microstructurally dependent local attack rather than extensive phase degradation. The results reveal that chloride corrosion in CrFeNi-based MPEAs is governed by the coupling between phase chemistry, local electrochemical heterogeneity, and phase morphology. This work highlights that reorganizing heterogeneous phase architectures provides a viable pathway for simultaneously tailoring mechanical and corrosion performance in advanced MPEAs.

Authors

Institutions

Publication Details

Journal
High Entropy Materials and Energies
Published
2026-11-16
DOI
https://doi.org/10.53941/heme.2026.100008
Primary Topic
High Entropy Alloys Studies
Type
article
Field-Weighted Citation Impact
0.00

Funders

Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

Phase Chemistry and Spatial Organization Govern Chloride Corrosion Behavior of CrFeNi-Based Multi-Principal Element Alloys

Jianfei Wang, Xiaoming Yang, Huiqiang Huang, Changzi Chen et al.
1 links
High Entropy Materials and Energies
High Entropy Alloys Studies
article

Phase Chemistry and Spatial Organization Govern Chloride Corrosion Behavior of CrFeNi-Based Multi-Principal Element Alloys

Jianfei Wang, Xiaoming Yang, Huiqiang Huang, Changzi Chen, Qingwei Gao
article en

Abstract

Phase heterogeneity provides an effective strategy for designing multi-principal element alloys (MPEAs), yet how phase constitution and spatial organization regulate chloride corrosion remains insufficiently understood. Here, the electrochemical corrosion behavior of as-cast equiatomic CrFeNi (AC-CrFeNi), as-cast Cr30Fe30Ni30Al5Ti5 (AC-CrFeNiAlTi), and hot-rolled Cr30Fe30Ni30Al5Ti5 (HR-CrFeNiAlTi) was comparatively investigated in 3.5 wt.% NaCl solution. The Al/Ti-induced transition from a single-phase FCC structure to a face-centered cubic (FCC) and body-centered cubic (BCC) heterogeneous architecture containing hierarchical ordered precipitates reduced the corrosion current density from 15.15 to 9.302 μA cm−2 and increased the low-frequency impedance modulus from 9.457 to 16.702 kΩ cm2. Further reorganization of the FCC/BCC regions into a directional lamellar morphology at unchanged nominal composition enhanced the corrosion resistance, yielding an icorr of 6.47 μA cm−2 and |Z|0.01 Hz of 47.176 kΩ cm2. Electrochemical impedance analysis revealed that the improved corrosion response of the hot-rolled alloy was accompanied by a more capacitive interfacial response and prolonged relaxation behavior. Post-electrochemical characterization revealed localized oxygen-enriched corrosion products, while XRD confirmed the retention of the primary FCC structure in AC-CrFeNi and the FCC/BCC structures in both CrFeNiAlTi conditions, indicating that corrosion remained controlled by microstructurally dependent local attack rather than extensive phase degradation. The results reveal that chloride corrosion in CrFeNi-based MPEAs is governed by the coupling between phase chemistry, local electrochemical heterogeneity, and phase morphology. This work highlights that reorganizing heterogeneous phase architectures provides a viable pathway for simultaneously tailoring mechanical and corrosion performance in advanced MPEAs.

High Entropy Materials and EnergiesVol. 1(1)
Jingchu University of Technology (CN)
Natural Science Foundation of Hubei Province
High Entropy Alloys Studies
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon