Multiphysics-guided design of black phosphorus–carbon anodes through coupled transport, alloying, and chemo-mechanical evolution

Black phosphorus–carbon (BP–C) anodes offer substantial potential for high-capacity sodium-ion storage, yet their performance is governed by tightly coupled ionic transport, electronic connectivity, alloying-induced deformation, pore evolution, and mechanical degradation. A two-dimensional electro-chemo-mechanical framework is developed to establish quantitative relationships between electrode architecture, operating conditions, and the evolving stability of BP–C composites. The model integrates electrolyte transport, carbon-network percolation, particle-scale Na diffusion, sequential P→NaₓP→Na₃P transformation, finite chemical deformation, conservation-based porosity evolution, and damage-dependent conductivity loss. Validation against independent BP/CBP capacity and expansion data yielded a mean error of 5.94%, while experimental constraints on Na diffusivity, interfacial kinetics, mechanical modulus, and pressure-dependent porosity produced a mean deviation of 5.68%. The coupled analysis reveals a non-monotonic architecture–performance relationship: a balanced configuration with a carbon fraction of 0.50 and an initial porosity of 0.40 achieved a stability metric of approximately 0.56, whereas additional carbon did not provide continuous improvement. The predicted instability-transition rate reached approximately 2.8 C for 0.20 μm BP particles under 0.50 MPa confinement but decreased to about 1.5 C for 0.80 μm particles at 1.50 MPa. Moreover, the favorable carbon fraction shifted from approximately 0.30–0.42 at low rates to 0.47–0.60 under faster operation. The balanced architecture retained the highest stability ranking in seven of eight uncertainty perturbations, demonstrating that favorable electrode configurations emerge from the simultaneous balance of electronic percolation, ionic accessibility, Na redistribution, expansion accommodation, and stress localization rather than optimization of any single material parameter. These results establish an operating-dependent multidimensional design framework for mechanically resilient, transport-efficient phosphorus-based sodium-ion anodes.

Authors

Institutions

Publication Details

Journal
Next Materials
Published
2026-11-16
DOI
https://doi.org/10.1016/j.nxmate.2026.104029
Primary Topic
Advancements in Battery Materials
Type
article
Field-Weighted Citation Impact
0.00
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

Multiphysics-guided design of black phosphorus–carbon anodes through coupled transport, alloying, and chemo-mechanical evolution

Mohit Sahni, Suleiman Ibrahim Shelash, Rimsha Nazeer, Naser Aslanian et al.
3 links
Next Materials
Advancements in Battery Materials
article

Multiphysics-guided design of black phosphorus–carbon anodes through coupled transport, alloying, and chemo-mechanical evolution

Mohit Sahni, Suleiman Ibrahim Shelash, Rimsha Nazeer, Naser Aslanian, Rashed Abu Hammour, M.M. Rekha, Faiz Mahmood, Subhashree Ray, Asokan Vasudevan, Sanjeev Kumar
article en

Abstract

Black phosphorus–carbon (BP–C) anodes offer substantial potential for high-capacity sodium-ion storage, yet their performance is governed by tightly coupled ionic transport, electronic connectivity, alloying-induced deformation, pore evolution, and mechanical degradation. A two-dimensional electro-chemo-mechanical framework is developed to establish quantitative relationships between electrode architecture, operating conditions, and the evolving stability of BP–C composites. The model integrates electrolyte transport, carbon-network percolation, particle-scale Na diffusion, sequential P→NaₓP→Na₃P transformation, finite chemical deformation, conservation-based porosity evolution, and damage-dependent conductivity loss. Validation against independent BP/CBP capacity and expansion data yielded a mean error of 5.94%, while experimental constraints on Na diffusivity, interfacial kinetics, mechanical modulus, and pressure-dependent porosity produced a mean deviation of 5.68%. The coupled analysis reveals a non-monotonic architecture–performance relationship: a balanced configuration with a carbon fraction of 0.50 and an initial porosity of 0.40 achieved a stability metric of approximately 0.56, whereas additional carbon did not provide continuous improvement. The predicted instability-transition rate reached approximately 2.8 C for 0.20 μm BP particles under 0.50 MPa confinement but decreased to about 1.5 C for 0.80 μm particles at 1.50 MPa. Moreover, the favorable carbon fraction shifted from approximately 0.30–0.42 at low rates to 0.47–0.60 under faster operation. The balanced architecture retained the highest stability ranking in seven of eight uncertainty perturbations, demonstrating that favorable electrode configurations emerge from the simultaneous balance of electronic percolation, ionic accessibility, Na redistribution, expansion accommodation, and stress localization rather than optimization of any single material parameter. These results establish an operating-dependent multidimensional design framework for mechanically resilient, transport-efficient phosphorus-based sodium-ion anodes.

Next MaterialsVol. 14
Chandigarh University (IN), Al-Ahliyya Amman University (JO), Jain University (IN), Islamic Azad University, Tehran (IR), INTI International University (MY), Siksha O Anusandhan University (IN), The Women University Multan (PK), Institute of Medical Sciences and Sum Hospital (IN), University of Education (PK), Sharda University (IN)
Affordable and clean energy
Advancements in Battery Materials
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon