Sunlight as Propulsion: A Solar-Heated Montgolfiere Balloon for Mars, Sized by Thermal Lift, Envelope and Diurnal Budgets
A dark-envelope balloon of twenty-eight hundred cubic metres rises each late morning as sunlight warms the carbon dioxide inside it, floats through the afternoon, and settles gently at dusk, repeating the cycle for weeks with no gas and no ballast aboard. Its operating principle: Montgolfiere hot-air balloon using solar heating of the envelope, where a blackened film turns sunlight into buoyancy directly: the same gas inside and out, lifted purely because the sunlit side of the ledger runs hotter. Headline values are mon air density mon kg per m3 mon = 0.0166; mon seasonal density mon low kg per mon m3 = 0.01361; mon seasonal density mon high kg per mon m3 = 0.01959; mon all up mon mass kg = 11.6; mon weight n mon = 43.04; mon payload kg mon = 2.8. No helium, no burner, no ballast: the entire propulsion plant is a dark surface and a low sun, and the budget shows that is enough, barely, at noon. SIMULATED, NOT MEASURED. Diurnal atmospheric profiling and repeat imaging of a fixed region for civilian science, rising and settling over uninhabited terrain. The vehicle carries thermometers and cameras, nothing more, nothing aboard it could be turned toward harming people, nations or anything standing on Earth.
Authors
- William Alexander Aldred (ORCID: https://orcid.org/0009-0000-1215-577X)
Publication Details
- Journal
- Zenodo (CERN European Organization for Nuclear Research)
- Published
- 2026-11-17
- DOI
- https://doi.org/10.5281/zenodo.24294738
- Primary Topic
- Aerospace Engineering and Energy Systems
- Type
- article
- Field-Weighted Citation Impact
- 0.00