Enhanced conductivity and chemical durability of SPEEK membranes by cerium-silica incorporation for low-humidity PEM fuel cells

This study addresses the conductivity durability trade-off that limits sulfonated poly(ether ether ketone) (SPEEK) membranes under low-humidity proton exchange membrane fuel cell (PEMFC) operation by incorporating a single sol–gel-derived Ce:SiO 2 hybrid nanofiller that combines hygroscopic water retention with radical-scavenging functionality. Raman spectroscopy confirmed the formation of a CeO 2 /SiO 2 composite in which crystalline cubic CeO2 (F 2 g mode at 465 cm⁻¹, with defect-related bands near 525 and 608 cm⁻¹) coexists with an amorphous silica phase, and together with FTIR provided evidence of interfacial Si–O–Ce bonding. SPEEK–Ce:SiO 2 composite membranes with 1, 5, and 10 wt% filler loadings were prepared by solution casting. Scanning electron microscopy confirmed filler incorporation but revealed partial agglomeration that became pronounced at 10 wt%, while AFM showed that filler addition markedly increased surface roughness and produced hill-like protrusions corresponding to the nanofiller and its agglomerates, consistent with the mechanical and conductivity trends. The SPEEK-Ce:SiO 2 (5%) composite gave the best balance of properties: proton conductivity reached 3.7 × 10⁻² S/cm at 30 °C, compared with 4.07 × 10⁻³ S/cm for bare SPEEK, and tensile strength increased from 1185.44 to 3144.07 kPa. Oxidative stability testing at 80 °C with 3 ppm Fe²⁺ showed the highest residual weight (81.6%) for the 5 wt% membrane after 250 min. In single-cell tests at 60 °C and 40% relative humidity, this membrane delivered a maximum power density of 50 mW/cm² at 130.2 mA/cm², versus 35 mW/cm² for bare SPEEK, and exhibited an open-circuit-voltage decay rate of only 0.04 mV/h compared with 0.35 mV/h for the pristine membrane. These results show that a 5 wt% Ce:SiO 2 loading simultaneously improves conductivity, oxidative stability, and low-humidity fuel-cell durability, indicating that the hybrid filler is a promising route to more robust SPEEK-based PEMs.

Authors

Institutions

Publication Details

Journal
Next Nanotechnology
Published
2026-11-16
DOI
https://doi.org/10.1016/j.nxnano.2026.100930
Primary Topic
Fuel Cells and Related Materials
Type
article
Field-Weighted Citation Impact
0.00
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

Enhanced conductivity and chemical durability of SPEEK membranes by cerium-silica incorporation for low-humidity PEM fuel cells

Touhami Mokrani, Tau S. Ntelane, Mayetu Segale, Olayemi Jola Fakayode et al.
Next Nanotechnology
Fuel Cells and Related Materials
article

Enhanced conductivity and chemical durability of SPEEK membranes by cerium-silica incorporation for low-humidity PEM fuel cells

Touhami Mokrani, Tau S. Ntelane, Mayetu Segale, Olayemi Jola Fakayode, Dhlamini Mokhotjwa, Rudzani Sigwadi, Tumelo Seadira, Dieketseng Tsotetsi, Bakang Mothudi
article en

Abstract

This study addresses the conductivity durability trade-off that limits sulfonated poly(ether ether ketone) (SPEEK) membranes under low-humidity proton exchange membrane fuel cell (PEMFC) operation by incorporating a single sol–gel-derived Ce:SiO 2 hybrid nanofiller that combines hygroscopic water retention with radical-scavenging functionality. Raman spectroscopy confirmed the formation of a CeO 2 /SiO 2 composite in which crystalline cubic CeO2 (F 2 g mode at 465 cm⁻¹, with defect-related bands near 525 and 608 cm⁻¹) coexists with an amorphous silica phase, and together with FTIR provided evidence of interfacial Si–O–Ce bonding. SPEEK–Ce:SiO 2 composite membranes with 1, 5, and 10 wt% filler loadings were prepared by solution casting. Scanning electron microscopy confirmed filler incorporation but revealed partial agglomeration that became pronounced at 10 wt%, while AFM showed that filler addition markedly increased surface roughness and produced hill-like protrusions corresponding to the nanofiller and its agglomerates, consistent with the mechanical and conductivity trends. The SPEEK-Ce:SiO 2 (5%) composite gave the best balance of properties: proton conductivity reached 3.7 × 10⁻² S/cm at 30 °C, compared with 4.07 × 10⁻³ S/cm for bare SPEEK, and tensile strength increased from 1185.44 to 3144.07 kPa. Oxidative stability testing at 80 °C with 3 ppm Fe²⁺ showed the highest residual weight (81.6%) for the 5 wt% membrane after 250 min. In single-cell tests at 60 °C and 40% relative humidity, this membrane delivered a maximum power density of 50 mW/cm² at 130.2 mA/cm², versus 35 mW/cm² for bare SPEEK, and exhibited an open-circuit-voltage decay rate of only 0.04 mV/h compared with 0.35 mV/h for the pristine membrane. These results show that a 5 wt% Ce:SiO 2 loading simultaneously improves conductivity, oxidative stability, and low-humidity fuel-cell durability, indicating that the hybrid filler is a promising route to more robust SPEEK-based PEMs.

Next NanotechnologyVol. 10
University of South Africa (ZA)
Affordable and clean energy
Fuel Cells and Related Materials
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon