Effect of Ni Interlayer Thickness on the Corrosion Resistance of DLC Coatings on Al Bipolar Plates for PEMFCs

Aluminium alloys are attractive candidates for bipolar plates in proton-exchange membrane fuel cells (PEMFCs) because of their low density, high thermal conductivity and excellent formability. Their rapid corrosion in the acidic fuel-cell environment, however, severely limits practical application. Diamond-like carbon (DLC) coatings offer an effective combination of corrosion resistance and electrical conductivity, yet adhesion to aluminium is often insufficient; metallic interlayers such as Ni are therefore routinely introduced. The systematic influence of Ni interlayer thickness on the overall corrosion performance of the resulting multilayer system remains poorly quantified. In this work, Ni interlayers of controlled thickness were electrodeposited on Al substrates, followed by physical-vapour deposition of DLC to produce Al/Ni/DLC coatings. The microstructure and corrosion behaviour of the coatings were characterised by Raman spectroscopy, potentiodynamic polarisation, electrochemical impedance spectroscopy (EIS), Mott–Schottky analysis and scanning electron microscopy. The DLC top layer substantially improves the corrosion resistance of the Al substrate by reducing the corrosion current density and increasing the polarisation resistance. Among the three thicknesses tested, an intermediate Ni thickness (1.5 μm) gives the lowest corrosion current density and the highest polarisation resistance and charge-transfer resistance. Conversely, increasing the Ni thickness to 20 μm results in a deterioration of the electrochemical protection, which is associated with a less uniform interfacial morphology and a pronounced low-frequency diffusion contribution in the impedance response. These findings demonstrate that precise control of Ni interlayer thickness is critical for simultaneously optimizing microstructure and corrosion resistance of Al/Ni/DLC coatings under PEMFC operating conditions.

Authors

Institutions

Publication Details

Journal
Coatings
Published
2026-11-16
DOI
https://doi.org/10.3390/coatings16111365
Primary Topic
Fuel Cells and Related Materials
Type
article
Field-Weighted Citation Impact
0.00
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

Effect of Ni Interlayer Thickness on the Corrosion Resistance of DLC Coatings on Al Bipolar Plates for PEMFCs

Xuan Zhang, Lin Zhang, Min Zhang, Xin Cai et al.
3 links
Coatings
Fuel Cells and Related Materials
article

Effect of Ni Interlayer Thickness on the Corrosion Resistance of DLC Coatings on Al Bipolar Plates for PEMFCs

Xuan Zhang, Lin Zhang, Min Zhang, Xin Cai, Jinhao Guo
article en

Abstract

Aluminium alloys are attractive candidates for bipolar plates in proton-exchange membrane fuel cells (PEMFCs) because of their low density, high thermal conductivity and excellent formability. Their rapid corrosion in the acidic fuel-cell environment, however, severely limits practical application. Diamond-like carbon (DLC) coatings offer an effective combination of corrosion resistance and electrical conductivity, yet adhesion to aluminium is often insufficient; metallic interlayers such as Ni are therefore routinely introduced. The systematic influence of Ni interlayer thickness on the overall corrosion performance of the resulting multilayer system remains poorly quantified. In this work, Ni interlayers of controlled thickness were electrodeposited on Al substrates, followed by physical-vapour deposition of DLC to produce Al/Ni/DLC coatings. The microstructure and corrosion behaviour of the coatings were characterised by Raman spectroscopy, potentiodynamic polarisation, electrochemical impedance spectroscopy (EIS), Mott–Schottky analysis and scanning electron microscopy. The DLC top layer substantially improves the corrosion resistance of the Al substrate by reducing the corrosion current density and increasing the polarisation resistance. Among the three thicknesses tested, an intermediate Ni thickness (1.5 μm) gives the lowest corrosion current density and the highest polarisation resistance and charge-transfer resistance. Conversely, increasing the Ni thickness to 20 μm results in a deterioration of the electrochemical protection, which is associated with a less uniform interfacial morphology and a pronounced low-frequency diffusion contribution in the impedance response. These findings demonstrate that precise control of Ni interlayer thickness is critical for simultaneously optimizing microstructure and corrosion resistance of Al/Ni/DLC coatings under PEMFC operating conditions.

CoatingsVol. 16(11)
Liaoning Normal University (CN), Anhui University of Technology (CN)
Affordable and clean energy
Fuel Cells and Related Materials
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon