Optoelectronic investigation of GaAs thin film solar cells incorporating carrier selective contacts
Abstract GaAs thin-film solar cells have emerged as promising candidates for next-generation high-efficiency photovoltaic devices owing to their excellent charge mobility, ideal bandgap and superior optical absorption characteristics. However, the performance of thin-film architectures is significantly limited due to high recombination losses, defect-assisted carrier trapping, and inefficient carrier-extraction due to limited absorber thickness. To overcome this, selective-contact engineering and defect optimization techniques are essential for improving carrier-transport characteristics, supressing recombination losses, and enhancing overall efficiency. In this study, we presented a comprehensive optoelectronic investigation GaAs thin-film solar cell employing TiO 2 and PEDOT: PSS as electron selective-contact and hole selective-contacts, respectively. The effect of GaAs absorber thickness, doping concentration, selective-contact properties, interface and bulk-defect densities, recombination mechanisms, and resistive losses were comprehensively studied to understand their effect on overall charge-transport and recombination properties. The simulation study reveals that, GaAs absorber with a thickness of 800 nm along with selective-contact thickness of 20 nm and doping concentrations of 1×10 18 cm −3 , provides optimum optoelectronic performance. Furthermore, the spectral-response analysis of the proposed device demonstrated an excellent optical utilization throughout the incident wavelength region, with quantum efficiency exceedingly above 90% indication efficient photogeneration and carrier transport. While a comparative selective-contact engineering using different selective-contact materials highlighted the critical role of band-alignment and carrier-selectivity properties in achieving efficient charge-extraction. The best performing configuration within the investigated parameter range has achieved a maximum J sc of 30.14 mAcm −2 , V oc of 1.11V, FF of 74.55%, and PCE of 24.96% under standard AM 1.5G illumination conditions. The obtained results highlighted the effectiveness of selective-contact engineering for enhancing carrier-transport and suppressing recombination losses in GaAs thin-film solar cells, thereby offering important design guidelines for next-generation thin-film PV devices.
Authors
- Babban Kumar Ravidas (ORCID: https://orcid.org/0000-0001-5263-8047)
- Suneet Kumar Agnihotri (ORCID: https://orcid.org/0000-0002-9665-5153)
- Mukesh Sahu (ORCID: https://orcid.org/0000-0002-3712-8329)
- Sachchidanand
- Jhanvi Choukse
- D.V. Prashant
- Khushi Rai
Institutions
- University of Delhi (IN)
- Indian Institute of Information Technology Design and Manufacturing Jabalpur (IN)
- Dr. B. R. Ambedkar National Institute of Technology Jalandhar (IN)
- Manipal University Jaipur (IN)
- GLA University (IN)
Publication Details
- Journal
- Discover Applied Sciences
- Published
- 2026-11-17
- DOI
- https://doi.org/10.1007/s42452-026-09820-6
- Primary Topic
- solar cell performance optimization
- Type
- article
- Field-Weighted Citation Impact
- 0.00