Dynamic Fracture Behavior of Modified Asphalt Mixtures: Experimental SCB Testing and XFEM Simulation Under Varying Temperatures and Notch Depths

This study investigated the temperature- and geometry-dependent dynamic fracture response of unmodified and modified asphalt mixtures using semi-circular bending (SCB) tests and extended finite element method (XFEM) simulations. Mixtures containing SBS, Enprene 611, Enprene 701 and crumb rubber were evaluated alongside unmodified and processed controls. SCB specimens with a radius of 75 mm, thickness of 50 mm, and support span of 120 mm were tested at −20, 0, 20, and 40 °C. Initial notch depths of 10, 20, and 30 mm corresponded to notch-to-radius ratios of 0.133, 0.267, and 0.400. Repeated haversine loading was applied at a maximum load equal to 50% of the corresponding static SCB peak load, and crack mouth opening displacement (CMOD) was recorded against load repetitions. For the reported static reference tests, increasing temperature from −20 to 40 °C reduced the peak load from 13,420 to 544 N for the 10 mm notch and from 5901 to 196 N for the 30 mm notch. The tested modified mixtures generally exhibited a later transition to accelerated CMOD development than the controls, with differences varying across temperatures, notch depths, and dosages. However, incomplete mixture-specific volumetric characterization prevents these differences from being attributed exclusively to binder modification, because differences in compactability and internal structure may also have contributed. A two-dimensional plane-strain XFEM model employed a maximum principal stress criterion for damage initiation and an energy-based traction–separation relationship for subsequent crack evolution. The simulations generally reproduced the gradual-to-rapid CMOD transition and relative mixture differences, while discrepancies increased near failure. The findings support condition-dependent mixture comparison but indicate that independently determined fracture parameters and explicit viscoelastic modeling are needed to improve predictive reliability.

Authors

Institutions

Publication Details

Journal
Buildings
Published
2026-11-16
DOI
https://doi.org/10.3390/buildings16224566
Primary Topic
Asphalt Pavement Performance Evaluation
Type
article
Field-Weighted Citation Impact
0.00
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

Dynamic Fracture Behavior of Modified Asphalt Mixtures: Experimental SCB Testing and XFEM Simulation Under Varying Temperatures and Notch Depths

Abdullah Demirbag, Ertuğrul Çambay
3 links
Buildings
Asphalt Pavement Performance Evaluation
article

Dynamic Fracture Behavior of Modified Asphalt Mixtures: Experimental SCB Testing and XFEM Simulation Under Varying Temperatures and Notch Depths

Abdullah Demirbag, Ertuğrul Çambay
article en

Abstract

This study investigated the temperature- and geometry-dependent dynamic fracture response of unmodified and modified asphalt mixtures using semi-circular bending (SCB) tests and extended finite element method (XFEM) simulations. Mixtures containing SBS, Enprene 611, Enprene 701 and crumb rubber were evaluated alongside unmodified and processed controls. SCB specimens with a radius of 75 mm, thickness of 50 mm, and support span of 120 mm were tested at −20, 0, 20, and 40 °C. Initial notch depths of 10, 20, and 30 mm corresponded to notch-to-radius ratios of 0.133, 0.267, and 0.400. Repeated haversine loading was applied at a maximum load equal to 50% of the corresponding static SCB peak load, and crack mouth opening displacement (CMOD) was recorded against load repetitions. For the reported static reference tests, increasing temperature from −20 to 40 °C reduced the peak load from 13,420 to 544 N for the 10 mm notch and from 5901 to 196 N for the 30 mm notch. The tested modified mixtures generally exhibited a later transition to accelerated CMOD development than the controls, with differences varying across temperatures, notch depths, and dosages. However, incomplete mixture-specific volumetric characterization prevents these differences from being attributed exclusively to binder modification, because differences in compactability and internal structure may also have contributed. A two-dimensional plane-strain XFEM model employed a maximum principal stress criterion for damage initiation and an energy-based traction–separation relationship for subsequent crack evolution. The simulations generally reproduced the gradual-to-rapid CMOD transition and relative mixture differences, while discrepancies increased near failure. The findings support condition-dependent mixture comparison but indicate that independently determined fracture parameters and explicit viscoelastic modeling are needed to improve predictive reliability.

BuildingsVol. 16(22)
Fırat University (TR), Bitlis Eren University (TR)
Asphalt Pavement Performance Evaluation
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon