Oxidation effect on the microwave properties of TPU/BAC nanocomposites
Films of composite materials based on thermoplastic polyurethane with oxidized birch activated carbon (TPU/BAC-HNO3) were obtained with a filler concentration of 30 wt.%. Also before introduction into TPU, activated carbon was oxidized with a 5% and 20% nitric acid solution. The morphology of composites was studied by the optical and FTIR methods. The films’ average thickness varied from 0.50 to 0.73 mm. The microwave properties of investigated composite films were evaluated in the X-band (8-12 GHz). It was found that all composites retain high radio-transparency across the measured frequency range, with reflection coefficient S11 ranging from -18.4 to -13.8 dB and transmission coefficient S21 values between -0.86 and -0.41 dB. Power absorption of loaded films slightly increased to 5.8-14.3% compared to pure TPU (5.5-8.8%). Attenuation constant (α) remains low both for the pure TPU and for all loaded samples containing pure and oxidized carbon filler, not exceeding 0.28 mm−1.
Authors
- Maksym Popov
- Andrii Komarov
- Viktoriia Malovychko
- Hryhorii Chumak
- Oleksii Gonchar
- Igor Matushko
- Liudmyla Grishchenko
Institutions
- Taras Shevchenko National University of Kyiv (UA)
- Chuiko Institute of Surface Chemistry (UA)
- Institute of Macromolecular Chemistry (UA)
- Institute of Engineering Thermophysics (UA)
- State Enterprise «All-Ukrainian State Research and Production Center for Standardization, Metrology, Certification and Consumers Rights Protection» (UA)
Publication Details
- Journal
- InterConf
- Published
- 2026-11-20
- DOI
- https://doi.org/10.51582/interconf.19-20.11.2026.029
- Primary Topic
- Electromagnetic wave absorption materials
- Type
- article
- Field-Weighted Citation Impact
- 0.00