Battery-aware adaptive sampling and batched-transmission framework for long-term IoT beehive telemetry in precision apiculture
Battery-powered beehive telemetry nodes must preserve diagnostically useful temporal resolution while limiting energy spent on repeated cellular sessions. This paper presents a battery-aware controller that treats local sensing and uplink as separate decisions. The controller selects 15-, 30-, 60-, or 120-min acquisition intervals from battery state of charge, robust multimodal variability, and alarm flags, while a second policy buffers time-stamped records and schedules batched transmission according to buffer age, batch size, battery condition, and alert priority. A complete ESP32 and SIM7000E wake-sense-process-transmit cycle measured at 3.6 V lasted 24.54 s and consumed 8.31 J; the recorded low-power current was 62.25 microamperes. These measurements parameterize a reference immediate-uplink model in which each acquisition is followed by one complete cellular session. A phase-resolved extension is formulated for batched operation, but no numerical batching gain or component-level energy share is reported because sensing-only and uplink-only measurements are not yet available. The paper therefore reports measurement-parameterized analytical estimates for fixed immediate-uplink intervals, a reproducible dual-timescale control framework, and a measurement protocol for subsequent validation.
Authors
- Szymon Przybył (ORCID: https://orcid.org/0009-0003-2077-3959)
- Sebastian Górecki (ORCID: https://orcid.org/0000-0001-5700-4000)
Institutions
- Lodz University of Technology (PL)
Publication Details
- Journal
- Journal of Automation Electronics and Electrical Engineering
- Published
- 2026-11-16
- DOI
- https://doi.org/10.24136/jaeee.2026.008
- Primary Topic
- IoT Networks and Protocols
- Type
- article
- Field-Weighted Citation Impact
- 0.00