A rigid-flexible coupled elbow rehabilitation monitoring system based on neural network fusion
Abstract Low-cost stretchable sensors offer promising solutions for wearable joint angle monitoring in home rehabilitation but suffer from viscoelastic hysteresis and relaxation drift. This paper proposes a wearable elbow angle monitoring system achieving high accuracy using only resistive stretch sensors. The system employs a dual-sensor antagonistic configuration and an LSTM network for hysteresis compensation. The antagonistic layout includes a pre-strained inner sensor to eliminate signal dead zones near full extension. A temporary resistive bend sensor provides dynamic ground truth during a one-time calibration phase and is subsequently removed for daily deployment. The neural network learns the history-dependent mapping from corrupted signals to compensated angle estimates. Experimental results demonstrate that the proposed system reduces the hysteresis loop width by 63.8\% and stabilizes estimates despite raw resistance drift. Evaluating random rehabilitation movements yields an RMSE of 6.2$^\circ$ and an $R^2$ of 0.95, representing a 42.0\% accuracy improvement over baseline linear regression. The achieved accuracy satisfies clinical requirements for home rehabilitation and validates the system as a comfortable and cost-effective alternative to rigid motion capture technologies.
Authors
- Sufeng Hu (ORCID: https://orcid.org/0009-0002-8133-0177)
- Aiguo Song (ORCID: https://orcid.org/0000-0002-1982-6780)
Institutions
- China Special Equipment Inspection and Research Institute (CN)
- Southeast University (CN)
Publication Details
- Journal
- Measurement Science and Technology
- Published
- 2026-11-16
- DOI
- https://doi.org/10.1088/1361-6501/aec287
- Primary Topic
- Advanced Sensor and Energy Harvesting Materials
- Type
- article
- Field-Weighted Citation Impact
- 0.00
Funders
- Government of Jiangsu Province