Modeling and Experimental Validation of Specimen Geometry Effects on Temperature Homogeneity of Advanced High-Strength Steels by Direct Electrical Heating
Abstract All kinds of matter are built up from elements in different compositions under physical laws. Thermal processes produce complex compositions, such as metal alloys. The quality of these processes heavily affects precise thermal conditions. Therefore, a homogeneity study of the temperature field on the surface of metal sheets under Direct Electrical Heating (DEH) was performed. The study was focused on measurements by infrared cameras and temperature field analyses. The most frequent steel, 22MnB (Svoboda et al. 2019), was used to prove the simulations. Suggestions for actions to optimize and enlarge homogeneous heating areas are raised up. The steel 22MnB5 is often used in the automotive industry for hot-stamping processes that require high strength, toughness, and durability, such as in structural components. The homogeneity of direct heating temperature depends on the type of heating (AC or DC), the shapes, positions, and dimensions of the electrodes. The relationships and balance among these parameters, as well as the optimum homogeneity, depend on cost, complexity, and technical capabilities. Using simulations, we optimized trench parameters in the samples and compared the results with real measurements.
Authors
- Bohuslav Mašek (ORCID: https://orcid.org/0000-0003-4533-2423)
- Ctibor Štádler
- Václav Kotlan (ORCID: https://orcid.org/0000-0003-1969-2759)
- Radek Holota (ORCID: https://orcid.org/0000-0002-2031-2744)
- Vjačeslav Georgiev
- Jiří Svoboda
Institutions
- Czech Academy of Sciences (CZ)
- Comtes Fht (Czechia) (CZ)
- Czech Academy of Sciences, Institute of Physics of Materials (CZ)
- University of West Bohemia in Pilsen (CZ)
Publication Details
- Journal
- Research Square
- Published
- 2026-11-16
- DOI
- https://doi.org/10.21203/rs.3.rs-11578287/v1
- Primary Topic
- Microstructure and Mechanical Properties of Steels
- Type
- preprint