Thermal Modeling and 3D Geometry Prediction of Multi-layer, Multi-Track Directed Energy Deposition

Abstract Laser powder directed energy deposition (LP-DED) is highly sensitive to process-induced thermal variation, which governs deposition accuracy, surface quality, and solidification microstructure. Analytical thermal models predict meltpool behavior quickly, but multi-layer builds require capturing heat accumulation in an increasingly preheated, geometrically evolving part. This study extends the classical Gaussian moving-source model to multi-layer, multi-track LP-DED of SS316L by incorporating surface heat loss, the enthalpy sink of the powder stream, beam attenuation through the powder cloud, and a spatially resolved layer-to-layer thermal carry-over field. The meltpool width from the predicted isotherms feeds a parabolic bead-geometry model based on powder mass conservation to predict the three-dimensional print profile. Four model parameters are calibrated from a single build using infrared-measured meltpool core temperatures, and the predictions are validated against SS316L thin-walls and cubes. For the thin-walls, the predicted meltpool width and length deviated from measurements by 16.1% and 15.6% on average, and by less than 2% at the lowest scan speed and powder feed rate. For the cubes, the predicted length, width, and height deviated by 13.7%, 8.6%, and 23.1% on average. The deviations of the predictions from the experimental results were investigated and are attributed mainly to treating the attenuated laser energy as entirely lost, which leads to under-predicted meltpool dimensions. This under-prediction can be overcome by properly calibrating the model around the nominal processing window. By rapidly predicting thermal behavior and part geometry, the model offers an efficient basis for process planning, parameter selection, and digital twins.

Authors

Institutions

Publication Details

Journal
Research Square
Published
2026-11-16
DOI
https://doi.org/10.21203/rs.3.rs-11568989/v1
Primary Topic
Additive Manufacturing Materials and Processes
Type
preprint
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
preprint

Thermal Modeling and 3D Geometry Prediction of Multi-layer, Multi-Track Directed Energy Deposition

Chaitanya Krishna Prasad Vallabh, Sudharshanan Dhabaseelan Vasugi, Souran Manoochehri
2 links
Research Square
Additive Manufacturing Materials and Processes
preprint

Thermal Modeling and 3D Geometry Prediction of Multi-layer, Multi-Track Directed Energy Deposition

Chaitanya Krishna Prasad Vallabh, Sudharshanan Dhabaseelan Vasugi, Souran Manoochehri
preprint en

Abstract

Abstract Laser powder directed energy deposition (LP-DED) is highly sensitive to process-induced thermal variation, which governs deposition accuracy, surface quality, and solidification microstructure. Analytical thermal models predict meltpool behavior quickly, but multi-layer builds require capturing heat accumulation in an increasingly preheated, geometrically evolving part. This study extends the classical Gaussian moving-source model to multi-layer, multi-track LP-DED of SS316L by incorporating surface heat loss, the enthalpy sink of the powder stream, beam attenuation through the powder cloud, and a spatially resolved layer-to-layer thermal carry-over field. The meltpool width from the predicted isotherms feeds a parabolic bead-geometry model based on powder mass conservation to predict the three-dimensional print profile. Four model parameters are calibrated from a single build using infrared-measured meltpool core temperatures, and the predictions are validated against SS316L thin-walls and cubes. For the thin-walls, the predicted meltpool width and length deviated from measurements by 16.1% and 15.6% on average, and by less than 2% at the lowest scan speed and powder feed rate. For the cubes, the predicted length, width, and height deviated by 13.7%, 8.6%, and 23.1% on average. The deviations of the predictions from the experimental results were investigated and are attributed mainly to treating the attenuated laser energy as entirely lost, which leads to under-predicted meltpool dimensions. This under-prediction can be overcome by properly calibrating the model around the nominal processing window. By rapidly predicting thermal behavior and part geometry, the model offers an efficient basis for process planning, parameter selection, and digital twins.

Research Square
Stevens Institute of Technology (US)
Additive Manufacturing Materials and Processes
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon