Plasma-Polymerized Coatings Retaining Oxidized-Sulfur Functionalities for Liquid-Interface Applications
Abstract Plasma polymerization enables the synthesis of functional coatings; however, poor retention of functional groups during extended liquid exposure can limit their performance at solid−liquid interfaces. Here, a hybrid precursor chemistry was combined with rapid thermal annealing (RTA) to retain oxidized sulfur within a carboxyl-rich plasma-polymer matrix. To this end, sulfur-containing coatings were deposited on silicon in a single step by atmospheric-pressure dielectric barrier discharge plasma polymerization. The precursors were trifluoromethanesulfonic acid (TFMSA), sodium 4-styrenesulfonate with ethylene glycol (NaSS + EG), and a hybrid precursor (HP) comprising H2SO4 and S8 in acrylic acid (AA), while AA alone served as the sulfur-free reference. X-ray photoelectron spectroscopy (XPS), supported by infrared reflection−absorption spectroscopy (IRRAS), distinguished reduced and oxidized sulfur species. Upon liquid exposure, the TFMSA- and NaSS + EG-derived coatings rapidly lost most of their sulfur, consistent with leaching of weakly bound sulfur-containing species. By contrast, the HP-derived coatings retained oxidized sulfur within the AA-derived matrix but were gradually removed from the substrate under continuous flow. A 10 s RTA pulse at a 440 °C set point, however, prevented this failure. The annealed coating preserved its substrate coverage, near-surface sulfur content, and oxidized-sulfur fraction during 168 h of continuous flow in acetate buffer (pH 5.5). Although annealing reduced the overall sulfur content (2.8 → 1.7 at %), it markedly improved coating durability. Overall, these findings identify sulfur leaching and coating removal as distinct failure modes and provide a materials-design strategy for durable plasma-polymer coatings that retain cation-exchange functionalities under liquid flow.
Authors
- N. Roy (ORCID: https://orcid.org/0000-0002-6578-8148)
- David Petitjean
- François Reniers
- Elahe Naghdi (ORCID: https://orcid.org/0000-0001-6824-4835)
- Filip Legein (ORCID: https://orcid.org/0000-0002-3834-4875)
- Güsta Irem Sakiz
- Wim De Malsche
Institutions
- Université Libre de Bruxelles (BE)
- Vrije Universiteit Brussel (BE)
Publication Details
- Journal
- ACS Applied Engineering Materials
- Published
- 2026-11-16
- DOI
- https://doi.org/10.1021/acsaenm.6c01400
- Primary Topic
- Atmospheric-Pressure Plasma Applications
- Type
- article
- Field-Weighted Citation Impact
- 0.00
Funders
- Région de Bruxelles-Capitale
- Vrije Universiteit Brussel