Effect of Nanoscale 5·1·7 Phase Seeds on the Mechanical Properties and Water Resistance of Magnesium Oxysulfate Cement

Magnesium oxysulfate (MOS) cement has potential for lightweight and fire-resistant applications owing to its relatively low raw-material calcination temperature and favorable fire resistance. However, slow early strength development and insufficient water resistance restrict its wider use. To address these limitations, a seed suspension rich in 5Mg(OH)2·MgSO4·7H2O (5·1·7 phase), with a median particle size (D50) of 165 nm, was prepared by wet grinding and incorporated at dosages of 0–8%. Setting time, compressive strength, and strength retention after water immersion were evaluated, while isothermal calorimetry, Krstulovic–Dabic kinetic modeling, XRD, SEM, and MIP were used to characterize hydration and microstructure. Seed addition shortened setting time and improved compressive strength and softening coefficients. At the highest tested dosage (8%), the 1 d and 28 d compressive strengths reached 8.08 and 23.02 MPa, increases of 98.04% and 14.93% over the control, respectively. After 28 d of curing, softening coefficients following 7 and 28 d of immersion increased from 0.54 and 0.59 to 0.82 and 0.84, respectively. Seed addition shifted the main calorimetric peak to earlier times and generally increased the apparent kinetic parameters. XRD and SEM revealed stronger 5·1·7 reflections and denser interlocking of needle- and rod-like hydrates. At 8%, the MIP modal equivalent pore diameter decreased from 188.15 to 110.26 nm, while the relative fraction of pores above 200 nm decreased from 32.51% to 19.22%. These findings associate improvements in compressive strength and strength retention after immersion with changes in hydration behavior and microstructure.

Authors

Institutions

Publication Details

Journal
Materials
Published
2026-11-16
DOI
https://doi.org/10.3390/ma19224845
Primary Topic
Magnesium Oxide Properties and Applications
Type
article
Field-Weighted Citation Impact
0.00
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

Effect of Nanoscale 5·1·7 Phase Seeds on the Mechanical Properties and Water Resistance of Magnesium Oxysulfate Cement

Shixuan Zhang, Xu Ai, Hongbo Tan, Zhijie Xiong et al.
3 links
Materials
Magnesium Oxide Properties and Applications
article

Effect of Nanoscale 5·1·7 Phase Seeds on the Mechanical Properties and Water Resistance of Magnesium Oxysulfate Cement

Shixuan Zhang, Xu Ai, Hongbo Tan, Zhijie Xiong, Daobin Hu, Peng Cao, Lei Jiang, Shaozhen Jia, Yakun Liu, Pengfei Wang
article en

Abstract

Magnesium oxysulfate (MOS) cement has potential for lightweight and fire-resistant applications owing to its relatively low raw-material calcination temperature and favorable fire resistance. However, slow early strength development and insufficient water resistance restrict its wider use. To address these limitations, a seed suspension rich in 5Mg(OH)2·MgSO4·7H2O (5·1·7 phase), with a median particle size (D50) of 165 nm, was prepared by wet grinding and incorporated at dosages of 0–8%. Setting time, compressive strength, and strength retention after water immersion were evaluated, while isothermal calorimetry, Krstulovic–Dabic kinetic modeling, XRD, SEM, and MIP were used to characterize hydration and microstructure. Seed addition shortened setting time and improved compressive strength and softening coefficients. At the highest tested dosage (8%), the 1 d and 28 d compressive strengths reached 8.08 and 23.02 MPa, increases of 98.04% and 14.93% over the control, respectively. After 28 d of curing, softening coefficients following 7 and 28 d of immersion increased from 0.54 and 0.59 to 0.82 and 0.84, respectively. Seed addition shifted the main calorimetric peak to earlier times and generally increased the apparent kinetic parameters. XRD and SEM revealed stronger 5·1·7 reflections and denser interlocking of needle- and rod-like hydrates. At 8%, the MIP modal equivalent pore diameter decreased from 188.15 to 110.26 nm, while the relative fraction of pores above 200 nm decreased from 32.51% to 19.22%. These findings associate improvements in compressive strength and strength retention after immersion with changes in hydration behavior and microstructure.

MaterialsVol. 19(22)
Wuhan University of Technology (CN), Guizhou Electric Power Design and Research Institute (CN), China Power Engineering Consulting Group (China) (CN), State Key Laboratory of Silicate Materials for Architecture (CN)
Magnesium Oxide Properties and Applications
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon