Laser-triggered and vision-validated collaborative method for node recognition of rebar tying robots
The accuracy of node perception in rebar tying robots determines the safety of the tying. The current laser-triggering-only solution cannot judge the state of the node, thus resulting in incorrect tying. Based on the multi-channel binary laser signal; this paper puts forward a collaborative recognition method that can be used for image collection and YOLOv5 classification: When the laser array is activated, a local image is obtained, and You Only Look Once version 5(YOLOv5) is then used to determine the category of the node; only nodes that are tieable will be tied. Based on the 60-image held-out test set, the model has an overall mean Average Precision at IoU=0.5 ([email protected]) of 92.0%; and the tieable node (normal_node) is 96.8%. A comparison of 91 physical nodes has shown that the false-binding rate of the above-mentioned method is only 8.2%; it is better than the laser-only scheme (45.1%) and close to that of the baseline using vision only. In addition, offline inference tests on the Intel Core i7 processor showed that the laser-triggered mode requires that only about 49.5% of the frames be processed; and thus the work required for YOLO inference has been reduced to about 50.5%. Without changing the existing hardware, the proposed method has increased the reliability of the decision to tie and provided a very cost-effective perception solution for engineering deployment.
Authors
- Shifeng Wen
- Yingdi He
- Yan Zhou
- Jingwen Liang
- Xi Zeng
- Cheng Zhou
Institutions
- National University of Singapore (SG)
- State Key Laboratory of Materials Processing and Die & Mould Technology (CN)
- Huazhong University of Science and Technology (CN)
Publication Details
- Journal
- Smart Construction
- Published
- 2026-11-16
- DOI
- https://doi.org/10.55092/sc20260021
- Primary Topic
- Advanced Neural Network Applications
- Type
- article
- Field-Weighted Citation Impact
- 0.00
Funders
- National Key Research and Development Program of China