Asphalt erosion in a Venturi
As a vehicle tyre passes at high speed through standing water on a highway, lateral jets of water can form across the surface of the asphalt pavement. As they do so, they may cause erosion of the asphalt by way of a number of possible mechanisms. An experiment was designed in which a small sample of asphalt was placed in a Venturi and subjected to water passing over its surfaces at a velocity in excess of 20 m/s. For all samples, severe erosion of the surface was seen, which led to the modelling of the experiment using computational fluid dynamics (CFD), which is reported here. The CFD modelling showed that the velocity in the Venturi was sufficient to cause cavitation in that region, with water vapour bubbles being formed on the rough asphalt surface. At velocities lower than that used in the experiment, the cavitation was not seen. It is postulated that cavitation and, in particular, the collapse of the associated microbubbles, are at least partially responsible for the stripping of the aggregate from the asphalt surface seen in the experiments.
Authors
- A. Abed
- G. Airey
- N. Thom
- L. Li
- D.M. Hargreaves
- M. Rahman
Institutions
- University of Nottingham (GB)
- Aston University (GB)
- Wrexham University (GB)
- Wrexham Maelor Hospital (GB)
Publication Details
- Journal
- Proceedings of the Institution of Civil Engineers - Engineering and Computational Mechanics
- Published
- 2026-11-16
- DOI
- https://doi.org/10.1680/jencm.26.00022
- Primary Topic
- Hydraulic flow and structures
- Type
- article
- Field-Weighted Citation Impact
- 0.00
Funders
- Engineering and Physical Sciences Research Council