Analytical and numerical investigation of an automobile axle shaft made of carbon steel, Kevlar fabric composite, and functionally graded material

Three candidate materials are evaluated here for an automobile half-shaft: AISI 1025 carbon steel, a Kevlar 29 fabric composite, and an 11-layer radially graded steel/Al 2 O 3 functionally graded material (FGM). The reference geometry corresponds to a Mahindra KUV100 passenger car (shaft diameter 68 mm, length 442 mm, flange diameter 203 mm), with a per-half-shaft design torque of 951.89 N·m derived from the published engine and gearbox data. A closed-form theoretical framework is developed first, including exact radial integrals for the torsional rigidity, flexural rigidity, and inertia of the graded section, and is implemented in Python. The numerical study employs Ansys Mechanical APDL 2025 R2 with SOLID186 brick elements on a shared-topology bonded model, exercised through four solution branches: linear-static, modal, full harmonic response, and eigenvalue buckling, with a five-level mesh-independence study. Theory and simulation agree to within 1.4% on static deflection and 2.7% on fundamental frequency for all three shafts. Among the candidates, the graded shaft returns the smallest static deflection (0.0577 mm), the highest fundamental frequency (371.8 Hz), the highest critical torque (2215 kN·m), and the smallest resonant amplitude under torque excitation (1.16 mm), while weighing 26.2% less than steel (11.81 kg against 15.99 kg). The Kevlar shaft is the lightest at 2.93 kg, an 81.7% saving, yet its Tsai-Hill reserve factor under the shear-dominated load path is 3.7 with representative aramid ply strengths and approaches 1.1 for a low-fiber-fraction fabric laminate, and its resonant amplitude (6.15 mm) is the largest of the set. Elastic stability margins exceed 475 for every candidate, so first yield rather than buckling governs. Steel remains the default for conventional service, Kevlar suits mass-critical applications subject to strict laminate quality control, and the FGM offers the best combined stiffness, vibration, and stability performance per unit mass.

Authors

Publication Details

Journal
Proceedings of the Institution of Mechanical Engineers Part D Journal of Automobile Engineering
Published
2026-11-16
DOI
https://doi.org/10.1177/09544070261502665
Primary Topic
Composite Structure Analysis and Optimization
Type
article
Field-Weighted Citation Impact
0.00
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

Analytical and numerical investigation of an automobile axle shaft made of carbon steel, Kevlar fabric composite, and functionally graded material

Saeed Asiri
Proceedings of the Institution of Mechanical Engineers Part D Journal of Automobile Engineering
Composite Structure Analysis and Optimization
article

Analytical and numerical investigation of an automobile axle shaft made of carbon steel, Kevlar fabric composite, and functionally graded material

Saeed Asiri
article en

Abstract

Three candidate materials are evaluated here for an automobile half-shaft: AISI 1025 carbon steel, a Kevlar 29 fabric composite, and an 11-layer radially graded steel/Al 2 O 3 functionally graded material (FGM). The reference geometry corresponds to a Mahindra KUV100 passenger car (shaft diameter 68 mm, length 442 mm, flange diameter 203 mm), with a per-half-shaft design torque of 951.89 N·m derived from the published engine and gearbox data. A closed-form theoretical framework is developed first, including exact radial integrals for the torsional rigidity, flexural rigidity, and inertia of the graded section, and is implemented in Python. The numerical study employs Ansys Mechanical APDL 2025 R2 with SOLID186 brick elements on a shared-topology bonded model, exercised through four solution branches: linear-static, modal, full harmonic response, and eigenvalue buckling, with a five-level mesh-independence study. Theory and simulation agree to within 1.4% on static deflection and 2.7% on fundamental frequency for all three shafts. Among the candidates, the graded shaft returns the smallest static deflection (0.0577 mm), the highest fundamental frequency (371.8 Hz), the highest critical torque (2215 kN·m), and the smallest resonant amplitude under torque excitation (1.16 mm), while weighing 26.2% less than steel (11.81 kg against 15.99 kg). The Kevlar shaft is the lightest at 2.93 kg, an 81.7% saving, yet its Tsai-Hill reserve factor under the shear-dominated load path is 3.7 with representative aramid ply strengths and approaches 1.1 for a low-fiber-fraction fabric laminate, and its resonant amplitude (6.15 mm) is the largest of the set. Elastic stability margins exceed 475 for every candidate, so first yield rather than buckling governs. Steel remains the default for conventional service, Kevlar suits mass-critical applications subject to strict laminate quality control, and the FGM offers the best combined stiffness, vibration, and stability performance per unit mass.

Proceedings of the Institution of Mechanical Engineers Part D Journal of Automobile Engineering
Industry, innovation and infrastructure
Composite Structure Analysis and Optimization
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon