3D printed waveguides and liquid crystal polymer (LCP) planar Luneburg lens for Ka-band applications

Purpose This study aims to develop and demonstrate a gradient dielectric-based planar Luneburg lens using a newly formulated liquid crystal material compatible with three-dimensional (3D) vat polymerization. The work also investigates the impact of additive manufacturing resolution and metallization techniques on the performance of waveguide-fed lens systems. Design/methodology/approach A step-by-step procedure covering the design, fabrication and experimental characterization of the Luneburg lens is presented. The lens is realized using a 3D vat polymerization process and is fed by a Rectangular Waveguide Size 28 (WR-28) operating over 26.5–36.5 GHz. Multiple prototypes, including a few lenses and two 3D-printed waveguides, are fabricated to evaluate the effects of fabrication resolution and metallization (copper and silver plating) on performance. In addition, to see the effect of the material, a lens using Rigid 4000 material was also fabricated and the results are compared with LCP lens. Findings Measurement results demonstrate that the proposed lens achieves a gain enhancement of up to 7 dB compared to the standalone waveguide feed while maintaining a stable radiation pattern across the operating band. It is observed that lower fabrication resolution degrades the gain by up to 1.5 dB. The effect of the material was also investigated, which shows the importance of developing low-loss material with good printability. In addition, copper-plated waveguides exhibit superior performance compared to silver-plated counterparts. Originality/value This work presents a novel integration of liquid crystal-based materials with 3D vat polymerization for realizing gradient-index electromagnetic structures. It provides practical insights into the influence of additive manufacturing parameters and metallization techniques on high-frequency device performance, offering valuable guidelines for the rapid prototyping of microwave and millimeter-wave components.

Authors

Institutions

Publication Details

Journal
Rapid Prototyping Journal
Published
2026-11-16
DOI
https://doi.org/10.1108/rpj-03-2026-0202
Primary Topic
Antenna Design and Analysis
Type
article
Field-Weighted Citation Impact
0.00
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

3D printed waveguides and liquid crystal polymer (LCP) planar Luneburg lens for Ka-band applications

Chantal Paquet, Jafar Shaker, Hojjat Jamshidi-Zarmehri, Nicolas Milliken et al.
4 links
Rapid Prototyping Journal
Antenna Design and Analysis
article

3D printed waveguides and liquid crystal polymer (LCP) planar Luneburg lens for Ka-band applications

Chantal Paquet, Jafar Shaker, Hojjat Jamshidi-Zarmehri, Nicolas Milliken, Amir Akbari, Tabitha Arulpragasam, Mohammed Labadlia, Bhavana Deore, Rony E. Amaya, Eqab Almajali
article en

Abstract

Purpose This study aims to develop and demonstrate a gradient dielectric-based planar Luneburg lens using a newly formulated liquid crystal material compatible with three-dimensional (3D) vat polymerization. The work also investigates the impact of additive manufacturing resolution and metallization techniques on the performance of waveguide-fed lens systems. Design/methodology/approach A step-by-step procedure covering the design, fabrication and experimental characterization of the Luneburg lens is presented. The lens is realized using a 3D vat polymerization process and is fed by a Rectangular Waveguide Size 28 (WR-28) operating over 26.5–36.5 GHz. Multiple prototypes, including a few lenses and two 3D-printed waveguides, are fabricated to evaluate the effects of fabrication resolution and metallization (copper and silver plating) on performance. In addition, to see the effect of the material, a lens using Rigid 4000 material was also fabricated and the results are compared with LCP lens. Findings Measurement results demonstrate that the proposed lens achieves a gain enhancement of up to 7 dB compared to the standalone waveguide feed while maintaining a stable radiation pattern across the operating band. It is observed that lower fabrication resolution degrades the gain by up to 1.5 dB. The effect of the material was also investigated, which shows the importance of developing low-loss material with good printability. In addition, copper-plated waveguides exhibit superior performance compared to silver-plated counterparts. Originality/value This work presents a novel integration of liquid crystal-based materials with 3D vat polymerization for realizing gradient-index electromagnetic structures. It provides practical insights into the influence of additive manufacturing parameters and metallization techniques on high-frequency device performance, offering valuable guidelines for the rapid prototyping of microwave and millimeter-wave components.

Rapid Prototyping Journal
University of Sharjah (AE), National Research Council Canada (CA), Carleton University (CA)
Antenna Design and Analysis
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon