The importance of eventflow sampling for river load estimation of trace contaminants

The accurate quantification of riverine contaminant loads is essential for assessing mitigation measures, pollution transport to downstream recipients (lakes, seas, countries) and for substance balance model validation. However, monitoring programmes based on regular, low-frequency grab samples often fail to adequately capture high-flow events (hereinafter referred to as eventflow). Ignoring these periods introduces significant bias into load estimation. To address this limitation, we developed and validated a targeted sampling strategy that combines high-frequency in-situ measurements with flow-type composite sampling, enabling accurate load estimation with reduced analytical effort. We tested this approach across three rivers with varying catchment characteristics and applied it to quantify seasonal and annual loads of trace contaminants representing different emission pathways and transport behaviours, including total and dissolved potentially toxic elements (PTEs), such as Hg, Ni, Pb, Cu, Cr, Zn, and As, pharmaceuticals, perfluoroalkyl carboxylic acids (PFCAs), and perfluoroalkyl sulfonic acids (PFSAs). We derived the eventflow contributions to annual loads and quantified the potential bias from conventional sampling that misses eventflow periods. Our results demonstrate that eventflow sampling and its proper representation in load estimation is essential for particle-bound and hydrologically-responsive contaminants. Excluding eventflow samples led to substantial underestimation of total PTEs loads ( ∼ 50% on average). For river systems dominated by diffuse inputs, PFCA loads were underestimated by ∼ 30% and pharmaceuticals by 28%–55%. In contrast, for river systems with substantial wastewater treatment plant inputs, the bias of dissolved PTEs, pharmaceuticals, and PFSA remained modest (typically within ± 15%), reflecting the dominance of steady point pathway contributions. The results demonstrate that our targeted sampling strategy provides a validated, cost-effective solution for accurate load estimation of trace contaminants.

Authors

Institutions

Publication Details

Journal
Journal of Contaminant Hydrology
Published
2026-11-16
DOI
https://doi.org/10.1016/j.jconhyd.2026.105159
Primary Topic
Water Quality and Pollution Assessment
Type
article
Field-Weighted Citation Impact
0.00
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

The importance of eventflow sampling for river load estimation of trace contaminants

Nikolaus Weber, Ottavia Zoboli, Steffen Kittlaus, Katarina Kozlica et al.
1 links
Journal of Contaminant Hydrology
Water Quality and Pollution Assessment
article

The importance of eventflow sampling for river load estimation of trace contaminants

Nikolaus Weber, Ottavia Zoboli, Steffen Kittlaus, Katarina Kozlica, Jörg Krampe, Radmila Milačič Ščančar, Matthias Zessner
article en

Abstract

The accurate quantification of riverine contaminant loads is essential for assessing mitigation measures, pollution transport to downstream recipients (lakes, seas, countries) and for substance balance model validation. However, monitoring programmes based on regular, low-frequency grab samples often fail to adequately capture high-flow events (hereinafter referred to as eventflow). Ignoring these periods introduces significant bias into load estimation. To address this limitation, we developed and validated a targeted sampling strategy that combines high-frequency in-situ measurements with flow-type composite sampling, enabling accurate load estimation with reduced analytical effort. We tested this approach across three rivers with varying catchment characteristics and applied it to quantify seasonal and annual loads of trace contaminants representing different emission pathways and transport behaviours, including total and dissolved potentially toxic elements (PTEs), such as Hg, Ni, Pb, Cu, Cr, Zn, and As, pharmaceuticals, perfluoroalkyl carboxylic acids (PFCAs), and perfluoroalkyl sulfonic acids (PFSAs). We derived the eventflow contributions to annual loads and quantified the potential bias from conventional sampling that misses eventflow periods. Our results demonstrate that eventflow sampling and its proper representation in load estimation is essential for particle-bound and hydrologically-responsive contaminants. Excluding eventflow samples led to substantial underestimation of total PTEs loads ( ∼ 50% on average). For river systems dominated by diffuse inputs, PFCA loads were underestimated by ∼ 30% and pharmaceuticals by 28%–55%. In contrast, for river systems with substantial wastewater treatment plant inputs, the bias of dissolved PTEs, pharmaceuticals, and PFSA remained modest (typically within ± 15%), reflecting the dominance of steady point pathway contributions. The results demonstrate that our targeted sampling strategy provides a validated, cost-effective solution for accurate load estimation of trace contaminants.

Journal of Contaminant HydrologyVol. 284
TU Wien (AT), Jožef Stefan Institute (SI), Jožef Stefan International Postgraduate School (SI)
Clean water and sanitation
Water Quality and Pollution Assessment
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon