Modeling nanoparticle‑induced attractions in granular soils using a DEM proximity contact law

Adding nanoparticles to granular soils can significantly increase shear strength and dilatancy. However, modeling sand–nanoparticle mixtures using the discrete element method (DEM) is challenging due to extreme multiscale effects (e.g. typically trillions of nanoparticles per fine sand particle). This study proposes a DEM proximity contact law that implicitly represents nanoparticle-induced interactions through a finite-range, pre-contact attractive force between sand particles. The formulation is guided by statistical-mechanical intuition and treats unresolved nanoscale effects as effective intergranular forces calibrated using laboratory measurements. The model is calibrated using drained triaxial test data for sand-colloidal silica mixtures. Direct simulation of each sand particle in laboratory-scale triaxial specimens requires prohibitively large particle counts (e.g. tens of millions); therefore, grain size distribution scaling is employed to achieve computationally feasible DEM simulations. The model is calibrated at a single confining stress using a fixed scale factor. The calibrated model reproduces key experimental trends across confining stresses, including increased peak strength and dilation at low confining stress and reduced nanoparticle effects at high confining stress. A key finding is that the macroscopic influence of proximity-based attraction is not invariant with respect to grain size scaling. Simulations at three particle scales show that halving the particle size requires an approximately eightfold reduction in attraction magnitude to reproduce comparable mechanical response, indicating a nonlinear dependence on the scale factor. These results show that calibrated parameters require scale-aware calibration. Overall, the proposed proximity contact law provides a computationally efficient framework for incorporating nanoparticle-induced interactions into DEM simulations of granular soils.

Authors

Institutions

Publication Details

Journal
Computers and Geotechnics
Published
2026-11-16
DOI
https://doi.org/10.1016/j.compgeo.2026.108831
Primary Topic
Geotechnical Engineering and Soil Mechanics
Type
article
Field-Weighted Citation Impact
0.00

Funders

Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

Modeling nanoparticle‑induced attractions in granular soils using a DEM proximity contact law

Youssef M. A. Hashash, Travis A. Shoemaker
1 links
Computers and Geotechnics
Geotechnical Engineering and Soil Mechanics
article

Modeling nanoparticle‑induced attractions in granular soils using a DEM proximity contact law

Youssef M. A. Hashash, Travis A. Shoemaker
article en

Abstract

Adding nanoparticles to granular soils can significantly increase shear strength and dilatancy. However, modeling sand–nanoparticle mixtures using the discrete element method (DEM) is challenging due to extreme multiscale effects (e.g. typically trillions of nanoparticles per fine sand particle). This study proposes a DEM proximity contact law that implicitly represents nanoparticle-induced interactions through a finite-range, pre-contact attractive force between sand particles. The formulation is guided by statistical-mechanical intuition and treats unresolved nanoscale effects as effective intergranular forces calibrated using laboratory measurements. The model is calibrated using drained triaxial test data for sand-colloidal silica mixtures. Direct simulation of each sand particle in laboratory-scale triaxial specimens requires prohibitively large particle counts (e.g. tens of millions); therefore, grain size distribution scaling is employed to achieve computationally feasible DEM simulations. The model is calibrated at a single confining stress using a fixed scale factor. The calibrated model reproduces key experimental trends across confining stresses, including increased peak strength and dilation at low confining stress and reduced nanoparticle effects at high confining stress. A key finding is that the macroscopic influence of proximity-based attraction is not invariant with respect to grain size scaling. Simulations at three particle scales show that halving the particle size requires an approximately eightfold reduction in attraction magnitude to reproduce comparable mechanical response, indicating a nonlinear dependence on the scale factor. These results show that calibrated parameters require scale-aware calibration. Overall, the proposed proximity contact law provides a computationally efficient framework for incorporating nanoparticle-induced interactions into DEM simulations of granular soils.

Computers and GeotechnicsVol. 203
University of Illinois Urbana-Champaign (US)
Army Research Office
Geotechnical Engineering and Soil Mechanics
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon