Nano-beam generated by two dielectric semi-cylinders
Abstract Herein, we numerically present a nano-beam produced by two dielectric semi-cylinders. The nano-beam is distributed at the gap of the two dielectric semi-cylinders. Both the full length at half maximum (FLHM) and the full width at half maximum (FWHM) of the nano-beam can be less than λ/2. The properties of the nano-beam can be tuned by changing the refractive index of the semi-cylinder and the gap length of the two semi-cylinders. When two semi-cylinders (radius: 1.5 μm; the refractive indices of the top and bottom semi-cylinder: 2.5 and 3.3 respectively; the gap: 270 nm) are illuminated by a plane wave with a wavelength of 532 nm, the maximum intensity of the nanoscale beam can reach nearly 32.4 times that of the incident wave. Finally, the influences of an unaligned semi-cylinders and oblique incident wave on the properties of the nano-beam are investigated. And we discuss the influences of the resonances of the bottom semi-cylinder on the nano-beam. Our results provide a novel optical device for generating a high-intensity nanoscale beam.
Authors
- Feng Xu (ORCID: https://orcid.org/0000-0002-2996-9662)
- Song Zhou (ORCID: https://orcid.org/0000-0003-0358-1309)
Institutions
- Huaiyin Institute of Technology (CN)
- Yancheng Institute of Technology (CN)
Publication Details
- Journal
- Physica Scripta
- Published
- 2026-11-16
- DOI
- https://doi.org/10.1088/1402-4896/aec2b3
- Primary Topic
- Metamaterials and Metasurfaces Applications
- Type
- article
- Field-Weighted Citation Impact
- 0.00