The Apollo 12–Surveyor 3 Plume-Ejecta Benchmark: Geometry and Identifiability Limits

The Apollo 12 landing near Surveyor 3 left measured damage on hardware that was returned to Earth. That damage is a rare test case for lunar plume-ejecta models. Modern Lunar Reconnaissance Orbiter Camera (LROC) data place the lunar module (LM) 156.8 m from Surveyor 3, on ground about 10 m higher than Surveyor's. This report tests one specified, collision-free ballistic model family. Grains travel ballistically in vacuum over the measured terrain, and their launch angle may rotate with the local slope by a coupling fraction k. When launch is referenced to horizontal (k = 0), no grain reaches the camera at 100 m/s or faster in 200 terrain-error trials. A simple height calculation shows why. A grain launched horizontally can reach the camera only if it is slower than about 46 m/s (42.7 to 51.5 m/s across the height cases). This result excludes a direct horizontal sheet. It does not exclude horizontal launch followed by collisions or scattering. Slope-referenced launch does deliver fast grains. Couplings of k = 0.5 and 1.0 predict nearly the same pit density (864 and 842 pits/cm²). Both exceed the measured 103 pits/cm², and both need the same unmeasured attenuation to match it. With k limited to 0.4 to 1.0, at least one such equal-output pair survives in 34 of 40 terrain cases and 33 of 33 registration cases. The record therefore bounds k from below but does not fix it. Neither the 255:2 front-to-rear crater count nor the literal shadow bearing separates the two settings. No retained pair matches the literal historical bearing for both members, and only 38 of 610 meet the literal elevation interval. They do disagree elsewhere. Around a fixed Surveyor 3, 49 of 296 candidate landing cells 30 to 200 m away are exposed under one coupling but not the other. This is a model sensitivity, not a validated hazard limit or protection distance. The Apollo 12 blast zone extends into Surveyor Crater, but both launch references can produce that downslope extension at the chosen comparison scale. The report identifies the measurements that could close the gap.

Authors

Publication Details

Journal
EarthArXiv (California Digital Library)
Published
2026-11-16
DOI
https://doi.org/10.31223/x5w239
Primary Topic
Planetary Science and Exploration
Type
preprint

Funders

Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
preprint

The Apollo 12–Surveyor 3 Plume-Ejecta Benchmark: Geometry and Identifiability Limits

Joseph Leporini
EarthArXiv (California Digital Library)
Planetary Science and Exploration
preprint

The Apollo 12–Surveyor 3 Plume-Ejecta Benchmark: Geometry and Identifiability Limits

Joseph Leporini
preprint en

Abstract

The Apollo 12 landing near Surveyor 3 left measured damage on hardware that was returned to Earth. That damage is a rare test case for lunar plume-ejecta models. Modern Lunar Reconnaissance Orbiter Camera (LROC) data place the lunar module (LM) 156.8 m from Surveyor 3, on ground about 10 m higher than Surveyor's. This report tests one specified, collision-free ballistic model family. Grains travel ballistically in vacuum over the measured terrain, and their launch angle may rotate with the local slope by a coupling fraction k. When launch is referenced to horizontal (k = 0), no grain reaches the camera at 100 m/s or faster in 200 terrain-error trials. A simple height calculation shows why. A grain launched horizontally can reach the camera only if it is slower than about 46 m/s (42.7 to 51.5 m/s across the height cases). This result excludes a direct horizontal sheet. It does not exclude horizontal launch followed by collisions or scattering. Slope-referenced launch does deliver fast grains. Couplings of k = 0.5 and 1.0 predict nearly the same pit density (864 and 842 pits/cm²). Both exceed the measured 103 pits/cm², and both need the same unmeasured attenuation to match it. With k limited to 0.4 to 1.0, at least one such equal-output pair survives in 34 of 40 terrain cases and 33 of 33 registration cases. The record therefore bounds k from below but does not fix it. Neither the 255:2 front-to-rear crater count nor the literal shadow bearing separates the two settings. No retained pair matches the literal historical bearing for both members, and only 38 of 610 meet the literal elevation interval. They do disagree elsewhere. Around a fixed Surveyor 3, 49 of 296 candidate landing cells 30 to 200 m away are exposed under one coupling but not the other. This is a model sensitivity, not a validated hazard limit or protection distance. The Apollo 12 blast zone extends into Surveyor Crater, but both launch references can produce that downslope extension at the chosen comparison scale. The report identifies the measurements that could close the gap.

EarthArXiv (California Digital Library)
National Aeronautics and Space Administration
Planetary Science and Exploration
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon