Experimental and numerical investigation of backstreaming positive ions in an RF-driven negative ion source

Abstract Backstreaming positive ions are an unavoidable byproduct in high-power negative ion-based neutral beam injection systems, posing a critical challenge to the long-pulse operational stability of ion sources due to the significant heat loads and material erosion they induce. This paper presents a comprehensive experimental and numerical investigation into the generation, spatial distribution, and thermal effects of BSPIs in the dual-RF-driver negative ion source at the HONOR test facility of CRAFT. Using a water-flow calorimetry diagnostic system, the dependence of the Backstreaming positive ion power fraction (PBSPI/Pbeam) on key operational parameters was systematically studied. The results show that the PBSPI/Pbeam ratio increases monotonically with the source filling pressure, rising from ~2.05% at 0.3 Pa to ~3.15% at 0.57 Pa. A non-monotonic dependence on beam energy is observed, with the ratio peaking at ~2.65% at 161 keV. This trend is attributed to the competition between the improved geometric transmission efficiency of BSPIs—resulting from reduced beam divergence at moderate energies—and the intrinsic decrease in collision cross-sections at higher energies. Furthermore, the ratio is found to decrease with increasing extracted beam current, which is explained by the space-charge-induced beam divergence that reduces the geometric transmission efficiency through the acceleration grids. Distinct BSPI bombardment traces on the backplate exhibit an array pattern corresponding to the plasma grid apertures. Coupled thermal-fluid-solid simulations, incorporating the measured heat loads, indicate that under typical high-power conditions (190 kV, 16.2 A), the maximum backplate temperature remains well below the material safety limit. This work clarifies the key mechanisms governing BSPI generation and validates the thermal reliability of the backplate design, providing a solid basis for the development of high-power NNBI systems.

Authors

Institutions

Publication Details

Journal
Nuclear Fusion
Published
2026-11-16
DOI
https://doi.org/10.1088/1741-4326/aec27e
Primary Topic
Particle accelerators and beam dynamics
Type
article
Field-Weighted Citation Impact
0.00
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

Experimental and numerical investigation of backstreaming positive ions in an RF-driven negative ion source

Lizhen Liang, Bo Liu, Yahong Xie, Xufeng Peng et al.
Nuclear Fusion
Particle accelerators and beam dynamics
article

Experimental and numerical investigation of backstreaming positive ions in an RF-driven negative ion source

Lizhen Liang, Bo Liu, Yahong Xie, Xufeng Peng, Zhihao Wang, Yuwen Yang, Chundong Hu, Yongjian Xu, Jianglong Wei, An-Ke Fang, Na Wang, Shan Wang, Lin Yu, Sheng Min Pan, Wei Liu
article en

Abstract

Abstract Backstreaming positive ions are an unavoidable byproduct in high-power negative ion-based neutral beam injection systems, posing a critical challenge to the long-pulse operational stability of ion sources due to the significant heat loads and material erosion they induce. This paper presents a comprehensive experimental and numerical investigation into the generation, spatial distribution, and thermal effects of BSPIs in the dual-RF-driver negative ion source at the HONOR test facility of CRAFT. Using a water-flow calorimetry diagnostic system, the dependence of the Backstreaming positive ion power fraction (PBSPI/Pbeam) on key operational parameters was systematically studied. The results show that the PBSPI/Pbeam ratio increases monotonically with the source filling pressure, rising from ~2.05% at 0.3 Pa to ~3.15% at 0.57 Pa. A non-monotonic dependence on beam energy is observed, with the ratio peaking at ~2.65% at 161 keV. This trend is attributed to the competition between the improved geometric transmission efficiency of BSPIs—resulting from reduced beam divergence at moderate energies—and the intrinsic decrease in collision cross-sections at higher energies. Furthermore, the ratio is found to decrease with increasing extracted beam current, which is explained by the space-charge-induced beam divergence that reduces the geometric transmission efficiency through the acceleration grids. Distinct BSPI bombardment traces on the backplate exhibit an array pattern corresponding to the plasma grid apertures. Coupled thermal-fluid-solid simulations, incorporating the measured heat loads, indicate that under typical high-power conditions (190 kV, 16.2 A), the maximum backplate temperature remains well below the material safety limit. This work clarifies the key mechanisms governing BSPI generation and validates the thermal reliability of the backplate design, providing a solid basis for the development of high-power NNBI systems.

Nuclear Fusion
Anhui University of Science and Technology (CN), Chinese Academy of Sciences (CN), Hefei Institutes of Physical Science (CN), Institute of Plasma Physics (CN), Institute of Energy, Hefei Comprehensive National Science Center (CN)
Affordable and clean energy
Particle accelerators and beam dynamics
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon