Optimal integration of Power-to-Vehicle and Power-to-Heat systems to support renewable deployment in smart urban energy districts

Decarbonising smart urban energy districts through distributed renewable generation requires planning frameworks able to capture sector-coupling flexibility, while accounting for the multidimensional trade-offs among technical, economic and environmental objectives. This study aims to address the complexity of energy district planning by applying a multi-objective optimisation framework to assess how Power-to-Heat and Power-to-Vehicle strategies can jointly enhance renewable integration. A residential district is modelled in EnergyPLAN comparing a reference configuration based on electricity grid and gas boilers with electrified scenarios including heating, cooling and transport demand under five electric vehicle penetration levels. For each scenario, photovoltaic, small-scale wind, electric batteries, and thermal storage capacities are optimised by minimising annual costs, critical excess electricity production, and CO 2 emissions. Results show that increasing electric vehicle penetration reduces emissions and annual costs, while lowering stationary battery requirements through smart charging flexibility. Beyond a certain level of on-site renewable deployment, further decarbonisation depends primarily on the combined electrification of mobility and domestic end-uses, rather than on additional renewable capacity alone. At intermediate electrification levels, thermal storage supports a solar-dominated mix, whereas higher electric vehicle penetration favours a more balanced renewable mix with reduced storage needs. The fully electrified configuration decreases primary fossil energy consumption, achieving 90% CO 2 abatement and reduces annual costs by about 7% compared with the reference case, while reaching 67% self-sufficiency and 79% self-consumption. The findings demonstrate that exploiting heat pumps and electric vehicles for system flexibility can enhance renewable integration and limit local excess electricity production.

Authors

Institutions

Publication Details

Journal
Applied Energy
Published
2026-11-17
DOI
https://doi.org/10.1016/j.apenergy.2026.129286
Primary Topic
Integrated Energy Systems Optimization
Type
article
Field-Weighted Citation Impact
0.00

Funders

Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

Optimal integration of Power-to-Vehicle and Power-to-Heat systems to support renewable deployment in smart urban energy districts

Endeshaw Alemu Bekele, Davide Astiaso Garcia, Lorenzo Mario Pastore, Antonio Sgaramella et al.
1 links
Applied Energy
Integrated Energy Systems Optimization
article

Optimal integration of Power-to-Vehicle and Power-to-Heat systems to support renewable deployment in smart urban energy districts

Endeshaw Alemu Bekele, Davide Astiaso Garcia, Lorenzo Mario Pastore, Antonio Sgaramella, Ashkan Mohammadbagherzadehmamaghani
article en

Abstract

Decarbonising smart urban energy districts through distributed renewable generation requires planning frameworks able to capture sector-coupling flexibility, while accounting for the multidimensional trade-offs among technical, economic and environmental objectives. This study aims to address the complexity of energy district planning by applying a multi-objective optimisation framework to assess how Power-to-Heat and Power-to-Vehicle strategies can jointly enhance renewable integration. A residential district is modelled in EnergyPLAN comparing a reference configuration based on electricity grid and gas boilers with electrified scenarios including heating, cooling and transport demand under five electric vehicle penetration levels. For each scenario, photovoltaic, small-scale wind, electric batteries, and thermal storage capacities are optimised by minimising annual costs, critical excess electricity production, and CO 2 emissions. Results show that increasing electric vehicle penetration reduces emissions and annual costs, while lowering stationary battery requirements through smart charging flexibility. Beyond a certain level of on-site renewable deployment, further decarbonisation depends primarily on the combined electrification of mobility and domestic end-uses, rather than on additional renewable capacity alone. At intermediate electrification levels, thermal storage supports a solar-dominated mix, whereas higher electric vehicle penetration favours a more balanced renewable mix with reduced storage needs. The fully electrified configuration decreases primary fossil energy consumption, achieving 90% CO 2 abatement and reduces annual costs by about 7% compared with the reference case, while reaching 67% self-sufficiency and 79% self-consumption. The findings demonstrate that exploiting heat pumps and electric vehicles for system flexibility can enhance renewable integration and limit local excess electricity production.

Applied EnergyVol. 427
Istituto Universitario di Studi Superiori di Pavia (IT), Sapienza University of Rome (IT)
Sapienza Università di Roma
Affordable and clean energy, Industry, innovation and infrastructure, Sustainable cities and communities, Climate action
Integrated Energy Systems Optimization
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon