Enhancing wear resistance of 42CrMo steel via tin bronze deposition using wire arc additive manufacturing

42CrMo steel is widely used in heavy machinery and other demanding applications owing to its high strength and toughness. However, its relatively poor surface wear resistance and friction properties limit its wider applications. To address this issue, tin bronze layers were deposited on 42CrMo substrates using wire arc additive manufacturing (WAAM). This study investigates the influence of overlap rate on the microstructural evolution and mechanical properties of the tin bronze/42CrMo structure. A defect-free metallurgical bond was achieved at the tin bronze/42CrMo interface under optimized conditions. The microstructure of deposited layer is dominated by α-Cu solid solution and δ phase, exhibiting a dendritic microstructure. Increasing the overlap rate enlarges the remelted zone, increases dendrite density, and enhances elemental interdiffusion across the interface, thereby improving interfacial bonding. At a 40% overlap rate, the deposited layer achieved an average microhardness of 122.7 HV, a low friction coefficient of 0.2517, and a shear strength of 382 MPa, while its wear mass loss rate was only 0.0100 mg/min, which is significantly lower than that of the bare steel substrate.

Authors

Publication Details

Journal
Figshare
Published
2026-11-16
DOI
https://doi.org/10.6084/m9.figshare.35025456
Primary Topic
Additive Manufacturing Materials and Processes
Type
article
Field-Weighted Citation Impact
0.00
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

Enhancing wear resistance of 42CrMo steel via tin bronze deposition using wire arc additive manufacturing

Wengang Zhai, Dian Gu, Chenxi Liu, Siyuan Li et al.
3 links
Figshare
Additive Manufacturing Materials and Processes
article

Enhancing wear resistance of 42CrMo steel via tin bronze deposition using wire arc additive manufacturing

Wengang Zhai, Dian Gu, Chenxi Liu, Siyuan Li, Xianfen Li
article en

Abstract

42CrMo steel is widely used in heavy machinery and other demanding applications owing to its high strength and toughness. However, its relatively poor surface wear resistance and friction properties limit its wider applications. To address this issue, tin bronze layers were deposited on 42CrMo substrates using wire arc additive manufacturing (WAAM). This study investigates the influence of overlap rate on the microstructural evolution and mechanical properties of the tin bronze/42CrMo structure. A defect-free metallurgical bond was achieved at the tin bronze/42CrMo interface under optimized conditions. The microstructure of deposited layer is dominated by α-Cu solid solution and δ phase, exhibiting a dendritic microstructure. Increasing the overlap rate enlarges the remelted zone, increases dendrite density, and enhances elemental interdiffusion across the interface, thereby improving interfacial bonding. At a 40% overlap rate, the deposited layer achieved an average microhardness of 122.7 HV, a low friction coefficient of 0.2517, and a shear strength of 382 MPa, while its wear mass loss rate was only 0.0100 mg/min, which is significantly lower than that of the bare steel substrate.

Figshare
Additive Manufacturing Materials and Processes
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon