Synergistic Construction of General‐Purpose Pitch‐Based Carbon Fiber Felt/Epoxy Thermally Conductive Composites via Three‐Dimensional Needled Networks and High‐Temperature Graphitization for Thermal Management Applications

ABSTRACT Constructing a continuous three‐dimensional filler network in a polymer matrix is an effective strategy to overcome interfacial thermal resistance and enhance the thermal conductivity of composite materials. General‐purpose pitch‐based carbon fibers (GPCF) demonstrate broad application prospects in thermally conductive materials and thermal management owing to their favorable thermal conductivity and processability. In this work, three‐dimensional general‐purpose pitch‐based carbon fiber felts (GPCFF) were fabricated via airflow‐needle punching and high‐temperature heat treatment using GPCF and epoxy resin (EP) as raw materials. Subsequently, GPCFF/EP composites were prepared via vacuum impregnation and compression molding. Experimental results indicate that the thermal conductivity of GPCFF/EP composites increases with rising heat treatment temperature and GPCF loading, reaching 3.70 W/mK (20.56 vol% GPCF, heat treatment temperature of 2900°C), which is approximately 17.62 times higher than that of pure EP (0.21 W/mK). High‐temperature heat treatment effectively enhances the graphitization degree of carbon fibers, thereby improving their intrinsic thermal conductivity. The three‐dimensional fiber network constructed by needle‐punching forms continuous heat transfer channels. Under compression molding, the filler network becomes densified, further improving the thermal conductivity of GPCFF/EP composites. Macroscopic and microscopic heat transfer mechanisms of GPCFF/EP composites are validated by combining a parallel heat conduction model with COMSOL numerical simulations. Infrared thermography and LED heat dissipation tests demonstrate that GPCFF/EP composites exhibit excellent thermal management performance. This study aims to provide recommendations for the fabrication and engineering application of highly thermally conductive composite materials.

Authors

Institutions

Publication Details

Journal
Polymer Composites
Published
2026-11-16
DOI
https://doi.org/10.1002/pc.71870
Primary Topic
Thermal properties of materials
Type
article
Field-Weighted Citation Impact
0.00
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

Synergistic Construction of General‐Purpose Pitch‐Based Carbon Fiber Felt/Epoxy Thermally Conductive Composites via Three‐Dimensional Needled Networks and High‐Temperature Graphitization for Thermal Management Applications

Xinfeng Wu, Jinhong Yu, Lixue Xiang, Huijuan Guan et al.
3 links
Polymer Composites
Thermal properties of materials
article

Synergistic Construction of General‐Purpose Pitch‐Based Carbon Fiber Felt/Epoxy Thermally Conductive Composites via Three‐Dimensional Needled Networks and High‐Temperature Graphitization for Thermal Management Applications

Xinfeng Wu, Jinhong Yu, Lixue Xiang, Huijuan Guan, Jin Chen, Zeyu Li, Shanshan Shi, Bo Tang, Tao Jiang, Ying Wang
article en

Abstract

ABSTRACT Constructing a continuous three‐dimensional filler network in a polymer matrix is an effective strategy to overcome interfacial thermal resistance and enhance the thermal conductivity of composite materials. General‐purpose pitch‐based carbon fibers (GPCF) demonstrate broad application prospects in thermally conductive materials and thermal management owing to their favorable thermal conductivity and processability. In this work, three‐dimensional general‐purpose pitch‐based carbon fiber felts (GPCFF) were fabricated via airflow‐needle punching and high‐temperature heat treatment using GPCF and epoxy resin (EP) as raw materials. Subsequently, GPCFF/EP composites were prepared via vacuum impregnation and compression molding. Experimental results indicate that the thermal conductivity of GPCFF/EP composites increases with rising heat treatment temperature and GPCF loading, reaching 3.70 W/mK (20.56 vol% GPCF, heat treatment temperature of 2900°C), which is approximately 17.62 times higher than that of pure EP (0.21 W/mK). High‐temperature heat treatment effectively enhances the graphitization degree of carbon fibers, thereby improving their intrinsic thermal conductivity. The three‐dimensional fiber network constructed by needle‐punching forms continuous heat transfer channels. Under compression molding, the filler network becomes densified, further improving the thermal conductivity of GPCFF/EP composites. Macroscopic and microscopic heat transfer mechanisms of GPCFF/EP composites are validated by combining a parallel heat conduction model with COMSOL numerical simulations. Infrared thermography and LED heat dissipation tests demonstrate that GPCFF/EP composites exhibit excellent thermal management performance. This study aims to provide recommendations for the fabrication and engineering application of highly thermally conductive composite materials.

Polymer Composites
Shanghai Polytechnic University (CN), Chinese Academy of Sciences (CN), Shanghai Dianji University (CN), Ningbo Institute of Industrial Technology (CN), Xuchang University (CN)
Thermal properties of materials
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon