Influence of the Hematite/Limonite Ratio on Sinter Properties and the Underlying Microscopic Mechanism

China’s iron and steel industry relies heavily on imported ores, whose hematite/limonite blending ratio markedly affects sinter strength and metallurgical properties; however, how the ratio acts through microscopic mineral phases remains insufficiently clarified. To this end, six imported iron ore fines were characterized for their high-temperature bonding phase properties (compressive strength of compacts roasted at 1280 °C), and seven gradient ratio schemes (30–60% limonite) were designed for sinter pot tests; the sinters were analyzed by XRD, optical microscopy and SEM-EDS. The bonding phase strength of hematite-type fines was on average higher than that of limonite-type fines (1364.14 N vs. 1011.15 N), although some limonite fines are heavier than some hematite fines. Techno-economic indices and metallurgical properties responded asynchronously to the ratio: the highest yield, productivity coefficient and vertical sintering speed were obtained at 45% limonite, whereas RDI+6.3 deteriorated sharply at 60% limonite (falling from 51.97% at 55% to 43.16%). Fe2O3 content first decreased and then increased with the limonite ratio, and reduction degradation was governed by the mode of occurrence of Fe2O3 rather than its total content; skeletal secondary hematite recrystallized from the liquid phase triggered crack propagation during reduction. Accordingly, limiting the limonite proportion to 40–45% (not exceeding 55%) while promoting acicular silico-ferrite of calcium and aluminum (SFCA) and suppressing skeletal secondary hematite is recommended for industrial ore blending.

Authors

Institutions

Publication Details

Journal
Metals
Published
2026-11-16
DOI
https://doi.org/10.3390/met16111255
Primary Topic
Iron and Steelmaking Processes
Type
article
Field-Weighted Citation Impact
0.00
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

Influence of the Hematite/Limonite Ratio on Sinter Properties and the Underlying Microscopic Mechanism

Kuan Lu, Zhiqiang Cai, Weijian Tian, Ning Wang et al.
1 links
Metals
Iron and Steelmaking Processes
article

Influence of the Hematite/Limonite Ratio on Sinter Properties and the Underlying Microscopic Mechanism

Kuan Lu, Zhiqiang Cai, Weijian Tian, Ning Wang, Lei Zhang, Hao Bai, Wei Zhao
article en

Abstract

China’s iron and steel industry relies heavily on imported ores, whose hematite/limonite blending ratio markedly affects sinter strength and metallurgical properties; however, how the ratio acts through microscopic mineral phases remains insufficiently clarified. To this end, six imported iron ore fines were characterized for their high-temperature bonding phase properties (compressive strength of compacts roasted at 1280 °C), and seven gradient ratio schemes (30–60% limonite) were designed for sinter pot tests; the sinters were analyzed by XRD, optical microscopy and SEM-EDS. The bonding phase strength of hematite-type fines was on average higher than that of limonite-type fines (1364.14 N vs. 1011.15 N), although some limonite fines are heavier than some hematite fines. Techno-economic indices and metallurgical properties responded asynchronously to the ratio: the highest yield, productivity coefficient and vertical sintering speed were obtained at 45% limonite, whereas RDI+6.3 deteriorated sharply at 60% limonite (falling from 51.97% at 55% to 43.16%). Fe2O3 content first decreased and then increased with the limonite ratio, and reduction degradation was governed by the mode of occurrence of Fe2O3 rather than its total content; skeletal secondary hematite recrystallized from the liquid phase triggered crack propagation during reduction. Accordingly, limiting the limonite proportion to 40–45% (not exceeding 55%) while promoting acicular silico-ferrite of calcium and aluminum (SFCA) and suppressing skeletal secondary hematite is recommended for industrial ore blending.

MetalsVol. 16(11)
University of Science and Technology Beijing (CN)
Responsible consumption and production
Iron and Steelmaking Processes
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon