Hybrid Reinforcement in PA6 Composites via Ternary Filler Systems: Glass Fibers, Talc, and Glass Beads

ABSTRACT A ternary hybrid filler system comprising glass fiber (F), glass bead (B), and talc (T) was developed, and the effects of single, binary, and ternary combinations were investigated at a constant total filler loading of 30 wt.%. The composites were prepared by melt blending using a co‐rotating twin‐screw extruder. Mechanical properties were evaluated through tensile, flexural, and Charpy impact (notched and unnotched) tests, along with heat deflection temperature (HDT) and injection‐molding shrinkage measurements. Filler distribution and interfacial features were qualitatively examined using scanning electron microscopy (SEM). Results indicate that filler geometry, aspect ratio, and interfacial bonding critically influence stress transfer, stiffness, toughness, and thermal performance. Glass fiber significantly improves stiffness, strength, and HDT but increases shrinkage anisotropy relative to unreinforced PA6. Talc enhances stiffness and dimensional stability, whereas glass beads provide more isotropic reinforcement. Combining F, B, and T can provide a favorable balance of mechanical performance and thermal resistance. Among the hybrid formulations, PA‐20F‐5B‐5T exhibits the best balance of properties, combining the highest tensile and flexural strengths (127 MPa and 178 MPa, respectively), superior notched and unnotched impact strengths (6.7 and 56 kJ/m 2 , respectively), the highest tensile strain (4.1%), the highest HDT (~188°C), and the lowest shrinkage in the flow and transverse directions. These findings suggest that multi‐filler architectures can mitigate some conventional material trade‐offs and offer a route to high‐performance, dimensionally stable PA6 composites for precision engineering applications. The proposed mechanisms are interpretations based on property trends and qualitative SEM observations, not verified by direct structural analysis.

Authors

Institutions

Publication Details

Journal
Polymer Composites
Published
2026-11-16
DOI
https://doi.org/10.1002/pc.71792
Primary Topic
Polymer Science and Applications
Type
article
Field-Weighted Citation Impact
0.00
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

Hybrid Reinforcement in PA6 Composites via Ternary Filler Systems: Glass Fibers, Talc, and Glass Beads

Hasti Bizhani, Mohsen Jamali, Reza Bagheri, Sedigheh Bagheri Kazemabad
Polymer Composites
Polymer Science and Applications
article

Hybrid Reinforcement in PA6 Composites via Ternary Filler Systems: Glass Fibers, Talc, and Glass Beads

Hasti Bizhani, Mohsen Jamali, Reza Bagheri, Sedigheh Bagheri Kazemabad
article en

Abstract

ABSTRACT A ternary hybrid filler system comprising glass fiber (F), glass bead (B), and talc (T) was developed, and the effects of single, binary, and ternary combinations were investigated at a constant total filler loading of 30 wt.%. The composites were prepared by melt blending using a co‐rotating twin‐screw extruder. Mechanical properties were evaluated through tensile, flexural, and Charpy impact (notched and unnotched) tests, along with heat deflection temperature (HDT) and injection‐molding shrinkage measurements. Filler distribution and interfacial features were qualitatively examined using scanning electron microscopy (SEM). Results indicate that filler geometry, aspect ratio, and interfacial bonding critically influence stress transfer, stiffness, toughness, and thermal performance. Glass fiber significantly improves stiffness, strength, and HDT but increases shrinkage anisotropy relative to unreinforced PA6. Talc enhances stiffness and dimensional stability, whereas glass beads provide more isotropic reinforcement. Combining F, B, and T can provide a favorable balance of mechanical performance and thermal resistance. Among the hybrid formulations, PA‐20F‐5B‐5T exhibits the best balance of properties, combining the highest tensile and flexural strengths (127 MPa and 178 MPa, respectively), superior notched and unnotched impact strengths (6.7 and 56 kJ/m 2 , respectively), the highest tensile strain (4.1%), the highest HDT (~188°C), and the lowest shrinkage in the flow and transverse directions. These findings suggest that multi‐filler architectures can mitigate some conventional material trade‐offs and offer a route to high‐performance, dimensionally stable PA6 composites for precision engineering applications. The proposed mechanisms are interpretations based on property trends and qualitative SEM observations, not verified by direct structural analysis.

Polymer Composites
Sharif University of Technology (IR)
Polymer Science and Applications
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon