Performance of multi-material adhesively bonded joints under quasi-static and ballistic normal loading
This study investigates the quasi-static and ballistic normal-impact response of adhesively bonded aluminum 6061-T6/A36 steel joints under peel-dominated bondline loading, with comparison to aluminum/aluminum and A36 steel/A36 steel configurations. Under ballistic normal-impact loading, the aluminum/A36 steel joints exhibited the highest estimated critical failure velocity among the tested material combinations. Their response was not intermediate between those of the aluminum/aluminum and A36 steel/A36 steel joints. A finite-element framework incorporating rate-dependent adherend behavior and an effectively calibrated adhesive damage parameter set was developed to interpret this response. The simulations indicate that bending of the more flexible aluminum backplate beneath the stiffer A36 steel patch produces a transient reversal of bondline normal stresses, consistent with delayed outer-edge crack initiation. An additional simulation with the adherend materials reversed predicted early inner-edge cracking, indicating that material orientation affects the deformation and crack-initiation sequence. Energy analysis further indicates higher simulated adhesive internal energy in the aluminum-backplate/A36-steel-patch joint than in the same-material configurations. These findings demonstrate that adherend mismatch can produce a distinct dynamic peel-dominated response in multi-material adhesive joints.
Authors
- Niell G. Elvin (ORCID: https://orcid.org/0000-0003-3834-045X)
- Feridun Delale (ORCID: https://orcid.org/0009-0008-2553-9295)
- Gizem Derya Demir (ORCID: https://orcid.org/0009-0002-7000-2493)
Institutions
- City College of New York (US)
Publication Details
- Journal
- Journal of Adhesion Science and Technology
- Published
- 2026-11-16
- DOI
- https://doi.org/10.1080/01694243.2026.2762196
- Primary Topic
- Mechanical Behavior of Composites
- Type
- article
- Field-Weighted Citation Impact
- 0.00