Studies of isotropic and anisotropic thin films using ellipsometry data modeled with wavelength by wavelength method

Abstract Ellipsometry is an important technique for optical characterization of dielectric properties of thin films, by measuring the change in the state of polarization of reflected light from a sample. Several properties can be extracted by fitting a model of the sample to ellip- sometry experimental data. Typically, the models used represent the complex refractive indices of the sample layers by dispersion functions and adjust parameters of these func- tions, which requires some a priori knowledge of the film refractive index. There is interest in wavelength by wavelength models that allow modeling without a priori knowledge of the sample refractive index, since properties of the film depend not only on the material but also on the film morphology. In this paper, we present a method based on the wavelength- by-wavelength model with an additional step that ensures Kramers-Kronig consistency of the refractive index. The method presented here allows to obtain both the isotropic and the uniaxial anisotropic refractive index and thickness of a thin film from variable angle spectroscopic ellipsometry data, unlike previous works on the literature that only studied the case of isotropic samples. This is a significant progress over previous reported works based on Kramers-Kronig optimization. It is also shown that the simultaneous use of mul- tiple incidence angle ellipsometry data with the wavelength by wavelength model, coupled with an algorithm that uses multiple initial conditions calculated from a uniform grid in complex refractive index space, solves the problem with multiple thickness and refractive index solutions. The method developed was used to study zinc oxide thin films deposited by doctor blade and spin coating on glass substrates. It was possible to obtain isotropic or uniaxial anisotropic refractive index, thickness and roughness of thin films without using dispersion functions or any a priori knowledge of the film optical properties.

Authors

Institutions

Publication Details

Journal
Journal of Physics D Applied Physics
Published
2026-11-16
DOI
https://doi.org/10.1088/1361-6463/aec272
Primary Topic
Optical Polarization and Ellipsometry
Type
article
Field-Weighted Citation Impact
0.00

Funders

Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

Studies of isotropic and anisotropic thin films using ellipsometry data modeled with wavelength by wavelength method

Lucimara Stolz Roman, Luís Victor Muller Fabris, Júlia Ketzer Majewski
Journal of Physics D Applied Physics
Optical Polarization and Ellipsometry
article

Studies of isotropic and anisotropic thin films using ellipsometry data modeled with wavelength by wavelength method

Lucimara Stolz Roman, Luís Victor Muller Fabris, Júlia Ketzer Majewski
article en

Abstract

Abstract Ellipsometry is an important technique for optical characterization of dielectric properties of thin films, by measuring the change in the state of polarization of reflected light from a sample. Several properties can be extracted by fitting a model of the sample to ellip- sometry experimental data. Typically, the models used represent the complex refractive indices of the sample layers by dispersion functions and adjust parameters of these func- tions, which requires some a priori knowledge of the film refractive index. There is interest in wavelength by wavelength models that allow modeling without a priori knowledge of the sample refractive index, since properties of the film depend not only on the material but also on the film morphology. In this paper, we present a method based on the wavelength- by-wavelength model with an additional step that ensures Kramers-Kronig consistency of the refractive index. The method presented here allows to obtain both the isotropic and the uniaxial anisotropic refractive index and thickness of a thin film from variable angle spectroscopic ellipsometry data, unlike previous works on the literature that only studied the case of isotropic samples. This is a significant progress over previous reported works based on Kramers-Kronig optimization. It is also shown that the simultaneous use of mul- tiple incidence angle ellipsometry data with the wavelength by wavelength model, coupled with an algorithm that uses multiple initial conditions calculated from a uniform grid in complex refractive index space, solves the problem with multiple thickness and refractive index solutions. The method developed was used to study zinc oxide thin films deposited by doctor blade and spin coating on glass substrates. It was possible to obtain isotropic or uniaxial anisotropic refractive index, thickness and roughness of thin films without using dispersion functions or any a priori knowledge of the film optical properties.

Journal of Physics D Applied Physics
Universidade Federal do Paraná (BR)
Conselho Nacional de Desenvolvimento Científico e Tecnológico, Financiadora de Estudos e Projetos, Universidade Tecnológica Federal do Paraná
Optical Polarization and Ellipsometry
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon