Experimental investigation on formability of heat-treatable aluminum alloy sheets during the electric hot forming in-die quenching process

This experimental work investigates the formability improvement of peak tempered AA7075-T6 and AA6061-T6 sheets during the novel electric hot forming in-die quenching (EHFQ) process. Unlike the conventional HFQ®, the blank was placed directly within the forming station, rapidly resistance heated to 470 °C using an alternating current electric injection, and soaked at this temperature for 10 minutes. Limiting dome height (LDH) tests were performed at punch speeds of 10 and 36 mm/min to generate the forming limiting curves (FLCs) along plane strain to near-to-uniaxial strain paths. The EHFQ process significantly increased the LDHs, improved thickness and strain distribution patterns, and overall formability. The FLC 0 increased by approximately 100% and 70.6% for AA7075 and AA6061, respectively, when compared to room temperature (RT). Even though bending-corrected-FLCs exhibited a marginal downward shift, the significant improvement in formability was evident. Scanning electron microscopy (SEM) and Energy dispersive X-ray spectroscopy (EDS) analyses indicated the dissolution of strengthening precipitates during the electro-thermal pre-heating stage. The Vickers hardness was reduced by 34.8% and 49.15% for AA7075 and AA6061, respectively, compared to that at RT. The SEM fractography revealed a higher density of shallow and deep dimples, hinting enhanced ductile fracture behavior, resulting in enhanced stretch formability especially for EHFQ at 36 mm/min. A post-forming heat-treatment substantially recovered the precipitation hardening with hardness nearing to the alloy-specific T6 temper. Overall, the combined benefits of improved formability and recovery of precipitation hardening favored AA7075 compared to AA6061.

Authors

Institutions

Publication Details

Journal
Proceedings of the Institution of Mechanical Engineers Part E Journal of Process Mechanical Engineering
Published
2026-11-16
DOI
https://doi.org/10.1177/09544089261506768
Primary Topic
Metal Forming Simulation Techniques
Type
article
Field-Weighted Citation Impact
0.00

Funders

Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

Experimental investigation on formability of heat-treatable aluminum alloy sheets during the electric hot forming in-die quenching process

Sudhy S. Panicker, Ajin Elias Alex, Rushil Ratnakar Rao
2 links
Proceedings of the Institution of Mechanical Engineers Part E Journal of Process Mechanical Engineering
Metal Forming Simulation Techniques
article

Experimental investigation on formability of heat-treatable aluminum alloy sheets during the electric hot forming in-die quenching process

Sudhy S. Panicker, Ajin Elias Alex, Rushil Ratnakar Rao
article en

Abstract

This experimental work investigates the formability improvement of peak tempered AA7075-T6 and AA6061-T6 sheets during the novel electric hot forming in-die quenching (EHFQ) process. Unlike the conventional HFQ®, the blank was placed directly within the forming station, rapidly resistance heated to 470 °C using an alternating current electric injection, and soaked at this temperature for 10 minutes. Limiting dome height (LDH) tests were performed at punch speeds of 10 and 36 mm/min to generate the forming limiting curves (FLCs) along plane strain to near-to-uniaxial strain paths. The EHFQ process significantly increased the LDHs, improved thickness and strain distribution patterns, and overall formability. The FLC 0 increased by approximately 100% and 70.6% for AA7075 and AA6061, respectively, when compared to room temperature (RT). Even though bending-corrected-FLCs exhibited a marginal downward shift, the significant improvement in formability was evident. Scanning electron microscopy (SEM) and Energy dispersive X-ray spectroscopy (EDS) analyses indicated the dissolution of strengthening precipitates during the electro-thermal pre-heating stage. The Vickers hardness was reduced by 34.8% and 49.15% for AA7075 and AA6061, respectively, compared to that at RT. The SEM fractography revealed a higher density of shallow and deep dimples, hinting enhanced ductile fracture behavior, resulting in enhanced stretch formability especially for EHFQ at 36 mm/min. A post-forming heat-treatment substantially recovered the precipitation hardening with hardness nearing to the alloy-specific T6 temper. Overall, the combined benefits of improved formability and recovery of precipitation hardening favored AA7075 compared to AA6061.

Proceedings of the Institution of Mechanical Engineers Part E Journal of Process Mechanical Engineering
Birla Institute of Technology and Science, Pilani - Goa Campus (IN), Birla Institute of Technology and Science, Pilani (IN)
Science and Engineering Research Board
Metal Forming Simulation Techniques
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon